Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Filter Reset Button SENSOR NORMAL SENSITIVE FILTER RESET Odor Sensor Detects odors such as tobacco smoke, pets, cosmetics, etc. *Before pressing the Filter Reset Button, be sure that the unit is plugged in. There is also a Filter Reset Button on Sensor Cover the remote control. Dust Sensor Detects dusts, smoke, pollen, house dust, etc. See Page E-18,E-20 After cleaning and reinserting the Washable Active Carbon Filter, press the Filter Reset Button. Main Unit Filter Frame True HEPA Filter (white) See Page E-19 (Dust Collection Filter with Anti-Bacterial Apatite Filter sheet covering its front surface) Washable Active Carbon Filter (black) (Deodorizing Filter)See Page E-16 Filter Separator Pre-Filter Front Panel Hook Remote Control See Page E-15 E-9 ENGLISH PART NAMES Handle Air Outlet Power Cord Power Plug BACK Purified Air Louver • The purified air discharge can be changed to the directions indicated by the arrows as desired. PART NAMES Handle Air Outlet Power Cord Power Plug BACK Purified Air Louver • The purified air discharge can be changed to the directions indicated by the arrows as desired. ACCESSORIES Remote Control (1 unit) Battery (AA battery X 2) • Operation Manual E-10 PREPARATION INSERTING BATTERIES IN THE REMOTE CONTROL Battery Information • The batteries for this remote control are for initial use only . Change the batteries when necessary. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.) • When not using the unit or remote control for an extended period, remove the batteries. (This prevents malfunction of the remote control from battery fluid leakage.) • The batteries of the accessory are for initial use only and may be depleted within 1 year. 1 Remove the back cover Press and slide the back cover to remove. 2 Insert batteries Insert batteries with and as shown below. 3 Close the back cover REMOTE CONTROL USE • Operate with the remote control facing the main unit (Receiver). • The signal range is about 23 feet (front). • Make sure there are no objects blocking the path of the signal. •A beep sound will be heard from the main unit when a signal is received. NOTE •Avoid dropping or damaging the remote control. In addition, be sure the remote control avoids moisture or place in direct sunlight or near an electric heater, etc., otherwise a malfunction may occur. Receiver Transmitter PREPARATION INSERTING BATTERIES IN THE REMOTE CONTROL Battery Information • The batteries for this remote control are for initial use only . Change the batteries when necessary. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.) • When not using the unit or remote control for an extended period, remove the batteries. (This prevents malfunction of the remote control from battery fluid leakage.) • The batteries of the accessory are for initial use only and may be depleted within 1 year. 1 Remove the back cover Press and slide the back cover to remove. 2 Insert batteries Insert batteries with and as shown below. 3 Close the back cover REMOTE CONTROL USE • Operate with the remote control facing the main unit (Receiver). • The signal range is about 23 feet (front). • Make sure there are no objects blocking the path of the signal. •A beep sound will be heard from the main unit when a signal is received. NOTE •Avoid dropping or damaging the remote control. In addition, be sure the remote control avoids moisture or place in direct sunlight or near an electric heater, etc., otherwise a malfunction may occur. Receiver Transmitter ENGLISH E-11 Be sure to remove the power plug from the wall outlet. PREPARATION • Be sure to remove the power plug from the wall outlet. Be sure to remove the power plug from the wall outlet. PREPARATION • Be sure to remove the power plug from the wall outlet. N To maintain the quality of the filters, they are placed in the main unit within plastic bags. Be sure to remove the filters from the plastic bags before using the unit. 1 Filter Removal 1 Place the unit facing up. Lay the unit on a flat surface such as a table, making sure not to pinch the power cord on the rear of the unit. 2 Remove the Front Panel. Press in the hook on the bottom of the front panel and lift to remove. Table Soft cloth 1 1 1 2 2 Front Panel Hook 3 3 Pull out the Filter Frame and remove the Pre-Filter and Filter Separator. Filter Frame 4 4 Remove the Washable Active Carbon Filter (black) and True HEPA Filter (white) from the plastic bags. Pre-Filter Filter Separator Washable Active Carbon Filter True HEPA Filter Filter Frame E-12 Filter Installation Tabs 1 1 After the True HEPA Filter is removed from the plastic bag, place it within the Filter Fram...