Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Keep this information booklet accessible for further consultations. The appliance has been designed as a exhausting version (external exhaust) or as a filter version (internal air recycle) cooker hood. SAFETY PRECAUTION 1. Take care when the cooker hood is operating simultaneously with an open fireplace or burner that depend on the air in the environment and are supplied by other than electrical energy, as the cooker hood removes the air from the environment which a burner or fireplace need for combustion. The negative pressure in the environment must not exceed 4Pa (4x10 -5 bar). Provide adequate ventilation in the environment for a safe operation of the cooker hood. Follow the local laws applicable for external air evacuation. 2. WARNING ! In certain circumstances electrical appliances may be a danger hazard. A) Do not check the status of the filters while the cooker hood is operating B) Do not touch the light bulbs after appliance use C) Flambe cooking is prohibited underneath the cooker hood D) Avoid free flame, as it is damaging for the filters and a fire hazard E) Constantly check food frying to avoid that the overheated oil may become a fire hazard F) Disconnect the electrical plug prior to any maintenance. G) This appliance is not intended for use by young children or infirm persons without supervision H) Young children should be supervised to ensure they do not play with the appliance I) There shall be adequate ventilation of the room when the rangehood is used at the same time as appliances burning gas or other fuels L) There is a risk of fire if cleaning is not carried out in accordance with the instructions INSTALLATION INSTRUCTIONS • ELECTRIC CONNECTION The appliance has been manufactured as a class II, therefore no earth cable is necessary. The connection to the mains is carried out as follows: BROWN = L line BLUE = N neutral If not provided, connect a plug for the electrical load indicated on the description label. Where a plug is provided, the cooker hood must be installed in order that the plug is easily accessible. An omnipolar switch with a minimum aperture of 3mm between contacts, in line with the electrical load and local standards, must be placed between the appliance and the network in the case of direct connection to the electrical network. • The appliance must be installed at a minimum height of 650 mm from an cooker stove in case of a gashob or an electrical hob. If a connection tube composed of two parts is used, the upper part must be placed outside the lower part. Do not connect the cooker hood exhaust to the same conductor used to circulate hot air or for evacuating fumes from other appliances generated by other than an electrical source. • Exhaust must not be discharged into a flue which is used for exhausting fumes from an appliance burning gas or other fuels • MOUNTING THE COOKER HOOD TO THE WALL Drill holes A-C-D according to indications quoted in (fig. 3). Use screws and screw anchors suitable for wall (e.g. reinforced cement, plasterboard) for the mounting of the cooker hood. Where screws and screw anchors are supplied ensure that they are suitable for the type of wall where the cooker hood is to be mounted. Lock in the flange connector Y to the cooker hood (fig. 2). Affix the bracket Z to the wall via the drill holes A Hang the cooker hood on the wall using the drill holes C. Fasten the cooker hood using the fastening drill holes D. • EXHAUSTING VERSION Connect the flange Y to the discharge opening with a connecting tube (do not carry out for filter version). Insert the upper exhausting of the chimney E inside the lower section F. Fix the lower of the chimney tothe hood by the screws H supplied (fig. 2). Pull out the upper section up to bracket Z and fix the screws L (fig. 2)In order to transform your cooker hood from suction version to filter version, ask your local retailer for active carbon filters and then • FILTERING VERSION IInstall the cooker hood and the two connectors as described in the paragraph mounting the exhausting version cooker hood. To mount the filter connector refer to instructions included in the kit. If the kit is not supplied, then order the kit as an accessory from your local dealer. The filters must be fitted to the fan unit placed inside the cooker hood. The air is replaced in the environment via the eyelets impressed on the connector E. USE AND MAINTENANCE • It is recommended to operate the appliance prior to cooking. It is recommended to leave the appliance in operation for 15 minutes after cooking is terminated in order to completely eliminate cooking vapours and odours. The proper function of the cooker hood is conditioned by the regularity of the maintenance operations, in particular, the active carbon filter. • The anti-grease filters capture the grease particles suspended in the air, and are therefore subject to clogging according to the frequency of the use of the appliance. In order to prevent fire hazard, it is recommendable to clean t...