Log:
Assessments - , GPA: ( )

Instruções de Operação Bosch, Modelo DHU662U/01

Fabricante : Bosch
Arquivo Tamanho: 3.58 mb
Arquivo Nome :

Língua de Ensino: itenesfrdenlpt

O documento está colocado, por favor, espere
O documento está colocado, por favor, espere

Facilidade de uso


Switching on the extractor hood when you start cooking. . Only switching off the extractor hood a few minutes after you have finished cooking. Light Fan settings Off 0 1 Low 0 Off On 2 High Light Fan settings OFF 0 0 ON 1 2 3 Light Fan settings ON / OFF Intensive setting 01 2 34 Filters and maintenance Grease filters: Metal filters are used to trap the greasy element of the vapours that develop during cooking. The filter mats are made from noncombustible metal. Caution: As the filter becomes more and more saturated with grease, not only does the risk of it catching fire increase but the efficiency of the extractor hood can also be adversely affected. Important: By cleaning the metal grease filters at appropriate intervals, the possibility of them catching fire as a result of a build-up of heat such as occurs when deep-fat frying or roasting is taking place, is reduced. Cleaning the metal grease filters: . In normal operation (1 to 2 hours daily), the metal grease filter must be cleaned after 8 to 10 weeks. . The filters can be cleaned in a dishwasher. It is however possible that they will become slightly discoloured. . The filter must be placed loosely, and NOT wedged, in the dishwasher. Important: Metal filters that are saturated with grease should not be washed together with other dishes etc. . When cleaning the filters by hand, soak them in hot soapy water first of all. Then brush the filters clean, rinse them thoroughly and leave the water to drain off. 17 Filters and maintenance Removing and inserting the metal grease filters: 1. Press the catch on the grease filters inwards and fold the filters down. 3. Insert the activated carbon filter at the rear, fold up and lock into position on the left and right with the wing nuts. The lugs on the left and right sides of the activated carbon filter are folded in for the 50 cm wide extractor hood. They must be folded up for the 60 cm and 90 cm wide extractor hoods. Replacing the activated carbon filter: . During normal operation (daily 1 to 2 hours) the activated carbon filter must be replaced approximately 1 x year. . The activated carbon filter can be purchased FROM YOUR DEALER (see Optional accessories). . Use only original filters. These ensure optimum function. Disposal of the old activated carbon filter: . Activated carbon filters do not contain any harmful substances. They can be disposed of as residual waste. Activated carbon filter: For binding the odorous substances in circulating-air mode. Remove the metal filters (see "Removing and inserting the metal grease filters"). 1. Insert the screws through the wing nuts and sleeves and screw the screws into the left and right sides of the intermediate base (required only during the initial installation). Screws, wing nuts and sleeves are enclosed with the activated carbon filter –. 2. Using a screwdriver or similar tool, press the two lugs on the housing inwards (required only during the initial installation). 2. Clean the filters. 3. Insert the cl...

Este manual também é adequado para os modelos :
Hoods - DHU662U/02 (3.58 mb)
Hoods - DHU662U/03 (3.58 mb)
Hoods - DHU662U/04 (3.58 mb)
Hoods - DHU665U/01 (3.58 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias