Assessments - , GPA: ( )

Instruções de Operação Bosch, Modelo PH30HS/01

Fabricante : Bosch
Arquivo Tamanho: 471.7 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Many products are regional in distribution and can be found in the local markets. It is imperative that all products be used in strict accordance with instructions on the package. CAUTION: Do not place highly flammable material on warming shelves. To Clean Filters and Trays Your hood has removable aluminum or stainless steel filters, stainless steel grease trays and stainless steel side panels. They must be cleaned when the filter light illuminates on the control panel or whenever they collect grease. When used over a grill, wok or other high grease applications, more frequent cleaning may be required. To Remove Filters and Grease Trays: • Turn the fan and lights off. Be sure filters are cool and grease has congealed before removal. • Remove in the following order: 1) Grease Trays — lift up and out. 2) Filters — Start with center filters, push up, then pull out from the bottom. 3) Side Panels — Remove these the same way as the filters. • The rating label and serial number labels are on the hood side panels and are visible after the filters have been removed. • The filters and grease trays can be washed by hand or in the dishwasher. The front and side panels may be washed with warm soapy water and polished with stainless steel cleaner. Reverse the above directions to reinsert the grease tray, filters and side panels. Note: Do not use cooktop while hood is disassembled. Grease trays must be in place before installing the filters. 1 1 2 2 Filters Grease traySide panel Side panel Figure 4: The hood and parts Note: Depending upon the size and model of hood, there will be from 1 to 3 filters per hood. English 6 Maintenance WARNING: Make sure the appliance, the lights, and the heat lamps are cool and power to the appliance has been turned off before replacing the light bulb(s) or heat lamps. Failure to do so could result in electrical shock or burns. The lenses must be in place when using the appliance. The lenses serve to protect the light bulb from breaking. The lenses are made of glass. Handle carefully to avoid breaking. Broken glass can cause an injury. CAUTION: Turn power off at breaker before removing a damaged bulb. Do not touch the bulbs immediately after use. The bulbs will remain hot for several minutes. Lights Note: Turn off the lights and fan. Allow the lights to cool before handling. If new lights do not operate, be sure lights are inserted correctly before calling for service. Halogen Light Replacement Figure 5: Halogen Light Replacement • Using a flat edge from a screwdriver or equivalent tool, pry loose the lens cover as shown in Figure 5. • Remove the damaged light and replace with a new 120 V, 40W (maximum) bulb with G-9 base. Follow package directions and do not touch new light with bare hands. • Reinstall the light and cover. Heat Lamp Replacement (27” models) Figure 6: Heat Lamp Replacement • Turn heat lamp counterclockwise to remove. • Replace lamp with either a PAR-38 175W heat lamp or a PAR-40 250W heat lamp. The PAR-38 175W hea...