Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
F. • To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the light button for five seconds. • To view the set temperature, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Optimal temperature selection Whilst wine is best stored at temperatures between 13 and 15. C, your wine can also be stored at drinking temperature. For red wine this is between 15 and 17. C, and for white wine between 12 and 13. C. To use the internal light • Press the light button to switch the light on or off. Key: 1 – Power button 2 – Light button 3 – Up button 4 – Down button fig. 1 Key: 1 – Power button 2 – Light button 3 – Up button 4 – Down button fig. 2 1 2 3 4 1 2 3 4 3 Use and Controls FWC601 Key: 1 – Light button 2 – Temperature set button 3 – Up button 4 – Down button 3 41 2 fig. 3 To switch the power on/off Press and hold the light and temperature set buttons simultaneously for five seconds. To change the temperature • Press the temperature set button once to select the upper zone. • The LED display for the upper zone will flash. • Press the up or down buttons until the required temperature is shown on the display. • Press the temperature set button again to select the lower zone. • The LED display for the lower zone will flash. • The preset temperature for the upper zone is 10.C / 50. F and for the lower zone is 16.C / 60. F. button for five seconds. • To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the • To view the set temperature in either zone, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Optimal temperature selection Whilst wine is best stored at temperatures between 13 and 15. C, your wine can also be stored at drinking temperature, for red wine this is between 15 and 17. C, and for white wine between 12 and 13. C. To use the internal light • Press the light button to switch the light on or off. Please note: The temperature in the lower zone must be set either the same or higher than the temperature in the upper zone. For optimal performance, the temperatures in the two zones should differ by at least 4. C Use and Controls FWC621 To switch the power on/off Press and hold the power button for five seconds. To change the temperature • Press the up or down buttons for the zone until the required temperature is shown on the display. • The preset temperature is 12.C / 54. F. • To view the set temperature, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Temperature display To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, touch the F./C. selection button. Optimal temperature selection Whilst wine is best stored at temperatures between 13 and 15. C, your wine can also be stored at drinking temperature. For red wine this is between 15 and 17. C, and for white wine between 12 and 13. C. To use the internal light • Press the light button to switch the light on or off. Key: 1 – Power on/off 2 – Light button 3 – Temperature display 4 – Up button 5 – Down button 1 3 4 5 fig. 4 Temp. c F C/ F Temp. c F 2 Key: 6 – °F/°C selection button 7 – Light button 8 – Temperature display 9 – Up button 10 – Down button 6 7 8 9 10 Left zone Right zone 5 Use Humidity Control (all models except FWC151) The wine coolers are equipped with a humidity control system to maintain optimal humidity within the wine cooler. Fill the humidity reservoir approximately 3/4 full with water. Place the reservoir on the runners on the top shelf as shown in fig. 5. Ensure it is located correctly to prevent water spillage. Check the water level regularly and refill if required. fig. 5 Temperature display The temperature display will show the current internal temperature. The display flashes: • When a different temperature is being set • If the internal temperature is +/- 5. away from the set temperature. This serves as a warning to prevent damage to the contents of the appliance should the temperature be too high. Dynamic Cooling and Silent modes The appliance has two different running modes. • Silent mode Once the required temperature is reached, the appliance will run without the fan. • Dynamic cooling mode The fan cycles on and off to circulate the air even after the required temperature is reached. This ensures consistent humidity and temperature distribution in the wine cooler, creating perfect conditions for long term storage. Dynamic cooling is the factory preset mode. To change to silent mode, touch and hold the up key for approximately five seconds. The wine cooler will beep three times to confirm silent mode is on. To change to dynamic cooling mode, touch and hold the down key for approximately five seconds. The wine cooler will beep five times to confirm dynamic cooling is on. Care and Cleaning Always disconnect the applianc...
Este manual também é adequado para os modelos :Frigoríficos - FWC301 (391.1 kb)
Frigoríficos - FWC601 (391.1 kb)
Frigoríficos - FWC621 (391.1 kb)