Assessments - 3, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Removing the Freezer Door • Lift the door straight up. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface. NOTE REMOVING THE REFRIGERATOR DOORS 3) Remove the door from the lower hinge (.) by lifting the door (.). 4) Remove the lower hinge (.) from the bracket lower hinge (.) by lifting the lower hinge (.) in the direction of the arrow. 1) With the door closed, remove the upper hinge cover (.) using a screwdriver, and then disconnect the wires (.). 2) Remove hinge screws (.) and ground screw (.) counter-clockwise, and take off the upper hinge (.) in the direction of the arrow (.). Take care when removing the door to ensure that it does not fall on you. Removing the Refrigerator Door Reattaching the Freezer Door REATTACHING THE REFRIGERATOR DOORS 1) Insert the lower hinge (.) in the bracket lower hinge (.). 2) Reattach the freezer door by inserting the hose (.) in the lower side of the door into the hole in the lower hinge (.) and pulling the hose down. 3) Insert the upper hinge shaft (.) into the hole (.). After levelling between the upper hinge hole (.) and the hole of the cabinet (.). Reattach hinge screws (.) and gound screw (.) in a clockwise direction. 4) Connect the wires. 5) Put the front part of the upper hinge cover ( ) on the front part of the upper hinge ( ) and reattach from the front part of the upper hinge cover first. 11 12 REATTACHING THE REFRIGERATOR DOORS Reattaching the Refrigerator Door 1) Insert the lower hinge (.) in the bracket lower hinge (.). 2) Place the hole in the refrigerator door (.) over the lower hinge (.). 3) Insert the upper hinge shaft (.) into the hole (.). After levelling between the upper hinge hole (.) and the hole of the cabinet (.). Reattach hinge screws (.) and gound screw (.) in the clockwise direction. 4) Connect the wires. 5) Put the front part of the upper hinge cover ( ) on the front part of the upper hinge ( ) and reattach it from the front part of the upper hinge cover first. 11 12 REATTACHING THE REFRIGERATOR DOORS FRONT LEG COVER SCREW 1) While pressing the front face of coupler (.), insert the water line (.) in the coupler. 2) Tighten the screw on the clamp ( a ). a Put on the front leg cover by turning the three screws clockwise, as shown in the figure. Reattaching the Water Supply Line Reattaching the Front Leg Cover ADJUSTING THE CLEARANCE BETWEEN THE DOORS The doors will be uneven if the refrigerator is not level. Case 1) Freezer door is lower than that of the refrigerator Insert a flat-blade screwdriver (-) (.) into a slot of the control lever (.), turn it clockwise and level the refrigerator. Case 2) Freezer door is higher than that of the refrigerator Insert a flat-blade screwdriver (-) (.) into a slot of the control lever (.), turn it clockwise and level the refrigerator. Do not make small adjustments with the control lever, Please refer to the next page. DIFFERANCE OF HEIGHT DIFFERANCE OF HEIGHT . DRIVER(-) . DRIVER(-) . CONTROL ...
Este manual também é adequado para os modelos :Frigoríficos - 24KLDW (2.07 mb)
Frigoríficos - RS21FANS (2.07 mb)
Frigoríficos - RS24DAMS (2.07 mb)
Frigoríficos - RS24DANS (2.07 mb)