Assessments - 5, GPA: 3.6 ( )

Fabricante : LG Arquivo Tamanho: 20.71 mb Arquivo Nome : Língua de Ensino:

The room must be at least 1 m. for every 8g of R600a refrigerant used in the appliance. The amount of used refrigerant is indicated on the label inside the fridge compartment. Never turn on the appliance showing any signs of damage. If in doubt, consult your dealer. Isobutane (R600a) is an environmental-friendly natural gas, but it is flammable. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged. Leaking refrigerant can ignite or cause eye injuries. If gas leakage is detected, remove from the room any open flames or potential sources of fire and ventilate the room for several minutes. INTRODUCTION WARNING! EN SH GLI ( ) to lower it. counterclockwise ( ) to raise 38 1. Choose a good location. Place your fridge-freezer where it is easy to use. 2. Do not place the appliance close to sources of heat, exposed to the direct sunlight or moisture. 4. 6. Please, do not remove the round stickers on the back side of the refrigerator. They are performing decoration functions by closing technological holes. 7. To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate unevenness of the floor. The front should be slightly higher than the rear for better door closing. The front should be slightly higher than the rear to aid in door closing. To easily turn the leveling screws tilt the appliance slightly. Turn the leveling screws forward part of a refrigerator, clockwise 8. Before using the appliance clean it thoroughly. 9. Install accessories such as ice cube box, etc., in their proper places. They are packed together to prevent possible damage during transportation. 10. Connect the power supply cord (or plug) to the outlet. Don't plug in with other appliances on the same outlet. Installation When the appliance is installed let it operate for 2-3 hours at normal temperature setting before filling it with fresh or frozen food. After unplugging the appliance, wait for 5 minutes or longer before reconnecting the plug. Your fridge-freezer is now ready for use. Starting The appliance is designed to operate at the limited range of ambient temperature, depending on climate zones. Do not use the appliance at the temperature out of the limit. Climate class of your appliance is indicated on the label with technical description inside the fridge compartment. Climate class Class Ambient temperature range °C +10 to +32 +16 to +43 +16 to +38 +16 to +32 SN N T ST Symbol Extended temperate Temperate Subtropical Tropical To provide necessary of air circulation, you should leave enough space behind, on each side and top of refrigerator-freezer. Set the limit stops in the upper corners of the back plate of the device as shown in picture 1. Stops are delivered in the basket door inside the refrigeration cabinet. 5. To provide optimal heat exchange and the reduction of power consumption, it is recommended to keep the gap from the top, between the rear and side ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :