Assessments - 0, GPA: 0 ( )

Fabricante : Samsung Arquivo Tamanho: 18.4 mb Arquivo Nome : Língua de Ensino:

(Only available on some models) 14 REVERSING THE DOOR SWING REVERSING THE DOOR SWING .Read these instructions completely and carefully • Before reversing the door, ensure first that the refrigerator is disconnect by the plug from the mains. You should take out contents and accessories like door guard from Warning the doors. Be careful not to drop the doors during disassembling or assembling. 1. Handle parts carefully to avoid scratching the paint. 2. Lay out all the screws by their related parts to avoid using them in the wrong places. 3. Provide a non-scratching work surface for the doors. (ex:blanket) 4. During door reversing, refrigerator should not be stained with oil. 5. We recommend to use tools descrided below. (Possible to use simliar size of socket wrench & wrench) Not provided Additional part Phillips Head Driver (+) Flat Head Driver (-) 10mm Socket Wrench (for bolts) 11mm Wrench (for hinge shaft) Allen Wrench (3/16inch) (for Mid hinge) Cover Wire Hinge L (In Top Cover) .DISASSEMBLY OF THE FRIDGE DOOR These operating instructions cover various models. The characteristics of your appliance may differ slightly from those described in this instructions. 1. Disassemble the CAP CABI 2. Disconnect electric wires 3. Remove 3 bolts on the top after removing 2 screws. inside of the CAP CABI. of the refrigerator with 10mm socket wrench. Make sure the door is firmly closed. CAP CABI 4. Disassemble the Fridge doorby lifting it upward. Be careful not to drop and scratch the face of the Fridge door. 5. Disassemble the COVER WIRE DOOR on the top of the fridge door with a flat- head screw driver by putting it into the indicated position(.). 6. Disjoin the COVER WIRE HINGE R from the ASSY HINGE UPP as shown. Take out the electric wire from the COVER WIRE HINGE R. COVER WIRE DOOR 15 ASSY HINGE UPP COVER WIRE HINGE R REVERSING THE DOOR SWING REVERSING THE DOOR SWING 7. Switch the direction of the electric wire as below. Take out the COVER WIRE HINGE L from the underneath the CAP CABI and rejoin it with the electric wire. 8. With 11mm wrench, separate the HINGE SHAFTand then flip the HINGE and reattach the HINGE SHAFT. 9-1. After rejoining the COVER WIRE HINGE L and the ASSY HINGE UPP, Switch the position of the GROMMET HINGE and the CAP SPACE DOOR. SHAFT GROMMET HINGE 9-2. When disassembling CAP10. Switch the position of the .DISASSEMBLY OF THE FREEZER DOOR SPACE, do not Push STOPPER DOOR and both side hooks but the GROMMET HINGE as 11. Remove 2 bolts and screw bottom hook as shown. shown. to disassemble the ASSY HINGE MID. STOPPER GROMMET 12. Disassemble the Freezer 13. Disassemble the COVER 14. Disassemble the ASSY door by lifting it upward.LEG FRONT by removing HINGE LOW as shown and Be careful not to drop and the 2 screws. put the AUTO GUIDE upside scratch the Freezer door. down, switch the position of the SHAFT. ASSY HINGE LOW AUTO GUIDE COVER LEG FRONT When joining, tighten a screw not to make Note unpredicted noise. 16 REVERSING THE DOOR SWING REVE...

Baixe o seu

Para fazer o download, introduza 2 dígitos :