Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Children should be supervised to ensure that they do not play with the appliance. Introduction Disposal of the old appliance Disposal of packing of new appliance Take back offer Disposal of the old appliance & packing of new appliance The old appliance whose life has expired should be destroyed in order to make it safe prior to disposal. Take out power plugs, separate connection wires and remove or destroy all springs, latches or bolting, to prevent children from being trapped during play. For environmental protection, old refrigerators should be disposed off by a professional disposition agency. If you have any question, please consult with the local sale agency or local authority. All packing materials used for this appliance are environment-friendly. Matters concerning material are as follows: PE : Polyethylene – Foil or pocket for packing PS : Formed objects made of foamed CFC-FREE polystyrene PP : Strapping tape made of polypropylene This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable. All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency. 26 NOTE This is a basic model. The shape of refrigerator is subject to change. 27 Identification of Parts NOTE This is a basic model. The shape of refrigerator is subject to change. 27 Identification of Parts InstallationLocationThis appliance is suitable for using at ambienttemperature between +16°C and +38°C. If the ambienttemperature drops below +16°C, it is possible that thefreezing foods in the freezer compartment are thawedbecause the temperature of the freezer gets warm. We recommend that the refrigerator be installed at a dryand well ventilated place. Make sure that the appliance isnot exposed to direct sunlight or placed in vicinity of aheat source such as stove, heaters, radiator. 28NOTEPlace on a flat and firm flooring. If the floor is noteven, adjust the feet by using the leveling screw at the front edge of the cabinet. If the front is slightly higher than the rear, the doorcan close more easily. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall. InstallationLocationThis appliance is suitable for using at ambienttemperature between +16°C and +38°C. If the ambienttemperature drops below +16°C, it is possible that thefreezing foods in the freezer compartment are thawedbecause the temperature of the freezer gets warm. We recommend that the refrigerator be installed at a dryand well ventilated place. Make sure that the appliance isnot exposed to direct sunlight or placed in vicinity of aheat source such as stove, heaters, radiator. 28NOTEPlace on a flat and firm flooring. If the floor is noteven, adjust the feet by using the leveling screw at the front edge of the cabinet. If the front is slightly higher than the rear, the doorcan close more easily. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall. 29InstallationElectrical connectionThis appliance should be connected to the mains AC220~240V , 50 Hz. You must connect this appliance onlyto the power socket with grounding complying with therelated regulations and only an approved expert shouldinstall this appliance. StartingBefore switching it on, leave the appliance standing forat least 2 hours, so that the circulation of the refrigerantstabilizes and no operating problems occur. Operation°ChWhen the appliance powers on, the initial state displayed on LED is "-18°C". Button K1 (Defrost): Press button K1 for three seconds the first time, indicator "-", "°C", "h" shut off, compressor stop running and the value displayed on LED is"OF". Press button K1 for three seconds the second time , indicator "-", "°C", "h" display normally, compressor running normally and LED displays the initial state. Button K2 (Quick freezing): Press butoon K2 for the first time, indicator "-", "°C"shut off, indicator "h" light on and initial freezing time displayed is"3h". Press button K2 for the second time the freezing time displayedis "2h". Press button K2 for the third time the freezing time displayed is "1h". The compressor will ren from 1hour to 3 hours according to the freezing time displayed on LED. Press button K2 for the fourth time, the indicators will recover the state before quick freeze. Button K3 (Temperature regulation): Press button K3 continuously, the provided temperature displayed will be from -14°C to -24°C circularly. 29InstallationElectrical connectionThis appliance should be connected to the mains AC220~240V , 50 Hz. You must connect this appliance onlyto the power socket with grounding complying with therelated regulations and only an approved expert ...
Este manual também é adequado para os modelos :Frigoríficos - GC-204SA (1.37 mb)