Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• As the ice maker in the refrigerator room makes ice cubes even faster, move the ice cubes from the refrigerator ice bin to the freezer ice bin if you need more ice cubes. • If ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker. See the illustration below. • Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket. Making Ice • To fill the ice bucket to maximum capacity after installation, follow these steps: 1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). - Waiting 24 hours will allow your ice maker to cool properly. check the water level Test button 2. Dispense 4 to 6 ice cubes into the glass. 3. After 8, and then 16 hours, dispense a full glass of ice. • To test the ice maker, press the Test button on the ice maker. You will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button. • The chime sounds automatically again to let you know the ice maker is working well. If you want to remove the ice cubes without using the ice bucket, please turn the ice maker off and remove the ice maker’s front cover from the ice maker. Note that the ice cubes in the ice maker can spill out over the drawer. Do not put food in the ice bucket. If you store food in the ice bucket, the food can strike the ice maker when you open or CAUTION CAUTION close the door, causing damage to the ice maker. Note that the ice cubes in the ice bucket may spill out over the drawer when you remove the ice bucket from the drawer. If this occurs, be sure to clear the ice cubes that spilled out of the drawer. If a power failure occurs, ice cubes may melt, and then freeze together when the power comes back on, causing the dispenser to stop working. To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water. If you use all the ice at once, you must repeat ice making Steps 2 and 3, left. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production. Using the Ice Off Function When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it diffi cult to remove them. To remove the ice bucket, push the button on the upper right of the bucket (1 in the illustration above), lift up the bottom, and then pull out. To put the bucket back in, push the bucket straight back until you hear a click. If the bucket does not fi t, turn the helix 90 degree (see the last illustration on the right, above) and try again. • Use only the ice maker provided with the refrigerator. • Have a suitably qualified person install and connect the water supply line to the refrigerator. • Connect the water supply line to a potable water supply only. CAUTION CAUTION CAUTION DA68-02916G-05.indb 28 2013. 12. 3. 11:45 Going on vacation... If you have a long vacation or business trip and won’t use the water or ice dispensers for a long time: -Close the water valve. Otherwise, water leakage may occur. - Remove all food. - Unplug the refrigerator. -Wipe excess moisture from inside and leave the doors open. Otherwise, odor and mold may develop. Ice Maker Do’s and Don’ts • Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket - It may result in personal injury or material damage. • Never put your finger or any other objects in the dispenser opening. -It may cause injury. • Do not try to disassemble the ice maker. • Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean it. When you insert the Ice maker tray, be CAUTION sure that the tray is well centered at the entrance. Otherwise, the tray may get stuck. Water clouding phenomenon All water provided to the refrigerator flows through the core filter which is an alkaline water filter. In the filtering process, the pressure of the water that has flowed out of the filter is increased, and the water becomes saturated with oxygen and nitrogen. When this water flows out into the air, the pressure plummets and the oxygen and nitrogen get supersaturated, which results in gas bubbles. The water may temporarily look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear. 02 OPERATING operating _29 30_ operating PARTS AND FEATURES Review the illustration below to become more familiar with the parts and features of your refrigerator. When closing the door, make sure the Vertical Hinged Section is in the correct position to avoid scratching the other door. If the Vertical Hinged Section is reversed, put it back to the right position and close the door. Moisture may appear at times on the Vertical Hinged Section. The door handle may become loose over time. If this happens, tighten the bolts found on the inside of the d...