Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. BC-TRM Serial No. BC-TRM Sony Corporation © 2003 Printed in Japan •The BC-TRM battery charger can only be used to charge a lithium ion type “InfoLITHIUM” battery pack (M series). •Unable to use this unit to charge a nickel cadmium type, or nickel metal hydride type battery pack. •“InfoLITHIUM” M series battery packs have the mark. •“InfoLITHIUM” is a trademark of Sony Corporation. •Le chargeur de batterie BC-TRM ne peut etre utilise que pour la recharge de batteries au lithium-ion de type « InfoLITHIUM » (modele M). •Ce chargeur ne peut pas etre utilise pour charger les batteries au nickel-cadmium ou aux hydrures metalliques de nickel. •Les batteries rechargeables « InfoLITHIUM » de serie M portent la marque . •« InfoLITHIUM » est une marque de fabrique de Sony Corporation. ABCV mark CHARGE lamp Terminal shutter Battery pack POWER plug Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. English WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. WARNING To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Notes on Use Precautions on Use • Connect the battery charger to an available wall outlet. Even though the CHARGE lamp of this unit is off, the battery charger is not disconnected from the power source. If any trouble occurs while the unit is in use, unplug the cord from the wall outlet to disconnect the power source. • Unable to use this unit to charge a nickel cadmium type, or nickel metal hydride type battery pack. • Attach the battery pack to the unit firmly when you charge the battery pack. • The battery terminal may be damaged if the battery pack is not attached correctly. • To protect the battery pack, remove the battery pack from the unit within 24 hours after the charging is completed. • Do not apply mechanical shock or drop the unit. • Keep the unit away from a TV or AM receivers. In particular, noise from the device may enter a TV or radio if it is placed nearby. • Unplug the unit from the wall outlet after use. Pull it out by the battery charger when unplug this unit. Do not pull it out by the battery pack. • Be sure that nothing metallic comes into contact with the metal parts of the unit. If it does, a short may occur and the unit may be damaged. Where not to place this unit Regardless of whether this unit is in use or in storage, do not place it in any of the following locations. Doing so may lead to breakdown. • Locations of extremely high temperature The temperature gets extremely high inside a car with the windows closed in summer or in strong sunshine, and leaving the unit inside may cause it to be deformed or break down. • In direct sunlight or near a heater There is a risk of deformation or breakdown. • Locations of excessive vibration • Locations with strong electromagnetism or radiant rays • Locations with excessive sand In locations such as the seashore and other sandy areas or where dust clouds occur, protect the unit from sand and dust. There is a risk of breakdown. Maintenance • Wipe the unit with a soft dry cloth when it's dirty. • When the unit is very dirty, wipe it using a cloth with a little neutral solvent added, and then wipe ...