It has been intelligently designed to be completely devoid of any complicated switching circuits that could possibly burn out. There are no tubes nor delicate electronics to fail or to cause radio frequency interference (RFI). Voltage output to the batteries remains at a safe and constant DC level from full load to no load, even if AC power runs as high as 132 VAC or as low as 108 VAC. This automatic voltage regulation relieves strain on internal electrical components and lengthens the lifespan of the unit. All components are designed to operate safely and continuously in an ambient temperature as high as 122° F. The Auto Equalizer Battery Charger is the first C-Charger to offer fully automatic equalizing. The advantages of automatic equalizing are clear: Features no manual switching or settings, no waiting for power failure, no 9 to 24 hour overcharges, and no failure to return to float due to high load currents. The addition of an Auto Equalizer Charger expands the equalizing options of the C-Charger line, which also includes Float/ Equalize Switch, 0-24 Hour Timer, and 0-24 Hour Automatic Equalizer Timer. If battery voltage drops below a set value (i.e. 25.5 VDC), the charger switches to the equalize mode and the yellow equalize indicator illuminates. The charger remains in equalize mode until the battery voltage reaches another set value (i.e. 28 VDC). This ensures that the battery is completely recharged and not cycled. At this voltage the charger is switched to the float mode and the yellow equalize indicator turns off. If battery voltage remains low, a red low voltage alarm indicator illuminates. If battery voltage remains high, a red high voltage alarm indicator illuminates. An optional summary alarm relay is available for remote locations. Adjustable low and high voltages permit users to tailor the charging system to specific batteries. Precise setting of these voltages is provided by fifteen turn potentiometers. • UL Listed • High Voltage indicator • Stainless steel for corrosion * Fully automatic equalizing • DC ammeter and voltmeter resistance • Constant voltage • AC circuit breaker • Flush meters output/continuous duty • Terminal board • Isolated positive and negative: • Equalize indicator and test • Vacuum impregnated, can be used as a negative button ferroresonant transformer for voltage charger • AC Power On indicator reliability • Two year limited warranty • Low Voltage indicator ¿Sharks SOLID POWER Specifications AC Input 108-132 volts/60 Hz (220 volts/50 Hz optional) Operating Temperature 0° to 50° C (32° to 122° F) Storage Temperature -20° to 60° C (-4° to 140° F) Cooling Convection DC Output - Float 2.16 VPC for lead Acid, 1.45 VPC for nickel cadmium - Equalize 2.33 VPC for lead Acid, 1.55 VPC for nickel cadmium Current Limit Approximately 135% Enclosure 304 stainless steel hinged cover to facilitate installation Model Number D.C. Output Height Inches Width Inches Depth Inches Approx. Weight Amps System Voltage 12 Volt AA1206* б 12 11 g S.5 12 AA1210* 10 12 11 g S.5 14 AA1220* 20 12 11 g S.5 22 24 Volt AA2406* б 24 11 g S.5 14 AA2410* 10 24 11 g S.5 22 AA2420* 20 24 13 16.5 S.5 3S 32 Volt AA3206 б 32 11 g S.5 22 AA3210 10 32 11 g S.5 2б VPC 2.5 2.4 2.3 2.2 2.1 2.0 l.g 1.5 Typical Output Curve 0 10 20 30 40 50 60 70 80 90 100 % OF RATED CHARGING CURRENT (AMPS) *UL Listed Optional Accessories * Remote summary relay * Battery temperature compensation Ordering Information Low DC voltage alarm relay High DC voltage alarm relay Current failure relay Combined Low/High voltage alarm relays AC power failure relay When ordering, please specify: 1. Model number 2. AC input: voltage & frequency 3. Battery type and number of cells 4. Ampere-hour capacity of battery б. Recharge time desired б. Description of load 7. Options Contact your Charles sales representative for specific product information. US D-IND001-B01 Rev. 3 Float ДМ/ I Charles Industries, Ltd. Voice: (847) 806-6300 Mañanes. Industrial Group Fax: (847) 806-6352 5600 Apollo Drive E-mail: mktserv@charlesindustries.com Rolling Meadows, IL 60008 USA...