Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. Specifications Specifications Description Power Consumption 110 VAC, 60 Hz Power Cord Six feet with 2-prong plug Output 2 or 5.5 amps at 12 Volts DC Battery Charge Indicator 12.3-12.6 Volts Charger Capacity 15-90 Ah (4 Volt Min. Charge) Overall Dimensions 4-3/8" (L) x 6-7/8" (W) x 11" (H) Weight 6.1 lbs. IMPORTANT SAFEGUARDS IMPORTANT SAFETY INSTRUCTIONS 1. “SAVE THESE INSTRUCTIONS” - This manual contains important safety and operating instructions for battery charger Model: 94088. 2. Do not expose charger to rain or snow. 3. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. 4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger. An extension cord should not be used unless absolutely necessary. 5. Use of improper extension cord could result in a MINIMUM AWG WIRE SIZE FOR risk of fire and electric shock. If extension cord must EXTENSION CORDS FOR THIS be used, make sure: BATTERY CHARGER (a) That pins on plug of extension cord are the same number, size, and shape as those of plug on charger. (b) That extension cord is properly wired and in good electrical condition. (c) That wire size is large enough for AC ampere rating of charger. 6. Do not operate this charger with a damaged cord or plug – replace the cord or plug immediately. 7. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 8. Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. AC input Length of cord, m Current I, A AWG size of cord 25 50 100 150 0< I < 2 18 18 18 16 2< I < 3 18 18 16 14 3< I < 4 18 18 16 14 4< I < 5 18 18 14 12 5< I < 6 18 16 14 12 6< I < 8 18 16 12 10 8< I < 10 18 14 12 10 01< I < 12 16 14 10 8 21< I < 14 16 12 10 8 41< I < 16 16 12 10 8 SKU 94088 For technical questions, please call 1-800-444-3353. Page 2 9. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. 10. WARNING - RISK OF EXPLOSIVE GASES. (a) Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance that each time before using your charger, you read this and follow the instructions exactly. (b) To reduce the risk of the battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary markings on these products and on engine. 11. PERSONAL PRECAUTIONS (a) Someone should be within range of your voice, or close enough to come to your aid, when you work near a lead-acid battery. (b) Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes. (c) Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery. (d) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood with running cold water for at least 10 minutes and get medical attention immediately. (e) NEVER smoke or allow a spark or flame in vicinity of battery or engine. (f) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical part that may cause an explosion. (g) Remove personal metal items such as rings, bracelets, necklaces, and watches when working near a lead-acid battery. A lead-acid battery can produce a short- circuit current high enough to weld a ring or the like to metal, causing a severe burn. (h) Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power to a low voltage electrical system other than in an automotive application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property. (i) NEVER charge a frozen battery. 12. PREPARING TO CHARGE BATTERY (a) If it becomes necessary to remove the battery from the vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc. (b) Be sure area around battery is well ventilated while battery is being charged. Gases can be forcefully blown away, by using a piece of cardboard or other non-metallic material such as a paper/wood fan. (c) Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes. SKU 94088 F...
Este manual também é adequado para os modelos :carregadores - 94088 (728.03 kb)