Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Harbor Freight Tools, Modelo 45005

Fabricante : Harbor Freight Tools
Arquivo Tamanho: 783.66 kb
Arquivo Nome : 40dabeb4-62ee-41fe-8265-9217bd0020a9.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Page 2 the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the equipment should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 5. Double insulated equipment is equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. 6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 7. Do not expose equipment to rain or wet conditions. Water entering equipment will increase the risk of electric shock. 8. Do not abuse the Power Cord. Never use the Power Cord to carry the equipment or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. 9. When operating equipment outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock. PERSONAL SAFETY 10. Stay alert. Watch what you are doing, and use common sense when operating equipment. Do not use equipment while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating equipment may result in serious personal injury. 11. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Plugging in equipment with the Power Switch on, invites accidents. 12. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Always wear ANSI approved safety goggles and a dust mask/ respriator when using or performing maintenance on this equipment. EQUIPMENT USE AND CARE 13. Do not force the equipment. Use the correct equipment for your application. The correct equipment will do the job better and safer at the rate SKU 45005 For technical questions, please call 1-800-444-3353. Page 3 for which it is designed. Do not use the equipment for a purpose for which it is not intended. 14. Do not use the equipment if the Power Switch does not turn it on or off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be replaced. 15. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the equipment. Such preventive safety measures reduce the risk of starting the equipment accidentally. Always unplug the equipment from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 16. Store idle equipment out of reach of children and other untrained persons. Equipment is dangerous in the hands of untrained users. 17. Maintain equipment with care. Do not use damaged equipment. Tag damaged equipment “Do not use” until repaired. 18. Check for breakage of parts and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment. 19. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment. SERVICE 20. Equipment service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 21. When servicing equipment, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning”section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. Additional Battery Charger Safety Precautions 1. This Battery Charger must only be used on lead-acid, rechargeable type batteries. Do not use this Battery Charger to charge household, dry-cell batteries. Dry-cell batteries may explode causing personal injury or property damage. 2. Do not use the Battery Charger as a low voltage system power supply except in automotive applications. 3. Do not try to start the automobile engine when the Battery Charger is connected to the battery. It may damage the unit. SKU 45005 For technical questions, please call 1-800-444-3353. Page 4 4. Always charge a lead-acid battery in a well ventilated area as explosive gases may be produced during charging. 5. Place the Battery Charger as far away from the battery as possible du...

Este manual também é adequado para os modelos :
carregadores - 45005 (783.66 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias