Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Wireless Edit wireless settings (wireless connections only; 085). TCP/IP Edit TCP/IP settings (086). FTP Edit ftp settings (086). . General Choose Profile name to edit the profile name, Password protection to enter a profile password and enable or disable password protection. Enabling password protection prevents others from viewing network settings. D Editing Profiles If the shutter-release button is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost. 84 Menu Guide . Wireless Edit the following wireless settings: • SSID (required): Enter the name (SSID) of the network on which the host computer or ftp server is located. • Communication mode: Select Infrastructure for wireless communication via a wireless network access point, Ad hoc if the camera is connected to the ftp server or computer directly. • Channel: Select a channel (ad hoc only; in infrastructure mode, the channel will be selected automatically). • Authentication: The authentication used on the network. Choose from open system, shared key, WPA-PSK, and WPA2-PSK (infrastructure) or open system and shared key (ad hoc). • Encryption: The encryption used on the network. The options available depend on the authentication used: Open: None; 64- or 128-bit WEP Shared: 64- or 128-bit WEP WPA-PSK: TKIP; AES WPA2-PSK: AES • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: Network Settings WEP (64-bit) WEP (128-bit) TKIP, AES Number of characters (ASCII) 5 13 8–63 Number of characters (hex) 10 26 64 • Key index: If WEP64 or WEP128 is selected for Encryption, choose a key index matching that used by the access point or host computer. A key index is not required when No encryption is selected. Menu Guide 85 Network Settings . TCP/IP If the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwise select Disable and enter the following information: • Address/Mask: Enter an IP address and subnet mask. • Gateway: If the network requires a gateway address, select Enable and enter the address supplied by the network administrator. • Domain Name Server (DNS): If a Domain Name Server exists on the network, select Enable and enter the address supplied by the network administrator. . FTP Edit the following ftp settings: • Server type: Choose ftp or sftp and enter the URL or IP address (required), destination folder, and port number. • PASV mode: Select Enable to enable PASV mode. • Anonymous login: Select Enable for anonymous login, or select Disable to supply a User ID and Password. • Proxy server: If a proxy server is required for ftp, select Enable and enter the address and port number f...