Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
You can also set power management options to alert you when the battery charge is low. The Microsoft® Windows® power meter window and icon, the battery charge gauge, and the low-battery warning provide information on the battery charge. Power Meter The Windows power meter indicates the remaining battery charge. To check the power meter: Double-click the icon in the taskbar, or: 1 Open the Control Panel. 2 Double-click the Power Options (or Power Management) icon to open the Power Options Properties window. 10 Battery Charger 3 Click the Power Meter tab. The Power Meter tab displays the current power source and amount of battery charge remaining. If the computer is connected to an electrical outlet, the icon appears. Battery Charge Gauge Before you attach the battery charger to the battery, press the status button on the battery charge gauge to illuminate the charge-level lights. Each light represents approximately 20 percent of the total battery charge. For example, if the battery has 80 percent of its charge remaining, four of the five lights are on. If no lights appear, the battery has no charge. Low-Battery Warning NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then connect the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins automatically. A pop-up window warns you when the battery charge falls below a certain percentage that is set in the Power Options Properties window. For more information on low-battery alarms, see “Power Management” in your online User’s Guide. Battery Charger | support.dell.com Removing the Battery From the Computer NOTICE: You cannot undock your computer while your computer is in standby mode or hibernate mode. If you choose to first undock the computer, and then put the computer in standby mode and swap batteries, you have up to 1 minute to safely complete the battery replacement before the computer shuts down and loses any unsaved data. 1 Ensure that the computer is turned off, in hibernate mode, or connected to an electrical outlet. 2 Remove the battery: a If the computer is docked, undock it. b Slide the battery lock latch on the bottom of the computer to the unlock position. c Slide and hold the battery latch release on the bottom of the computer, and then remove the battery from the bay. 12 1 battery lock latch 2 battery latch release 12 Battery Charger Attaching the Battery to the Battery Charger 1 Align the bottom of the battery with the bottom of the battery charger. 2 Slide the battery into the battery charger connector, and slide the battery tabs into the battery charger slots. 2376451 1 battery charger connector 5 battery tabs (2) 2 battery charger 6 battery 3 battery charger lock latch 7 battery charger latch release 4 battery charger slots (2) 3 Slide the battery charger lock latch into the lock position. Battery Charger | support.dell.com Charging the Battery 1 Remove the battery from the computer and attach the battery to the battery charger (see "Removing the Battery From the Computer" and "Attaching the Battery to the Battery Charger"). 2 Connect the AC adapter to the AC adapter connector on the battery charger and to the electrical outlet. CAUTION: If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the power strip. Some power strips may allow you to insert the plug incorrectly. Incorrect insertion of the power plug could result in permanent damage to your computer, as well as risk of electric shock and/or fire. Ensure that you insert the ground prong of the power plug into the mating ground contact of the power strip. The 27-WHr battery should fully charge in approximately 1.5 hours; the 58-WHr battery should fully charge in about 3 hours. While the battery is charging, the battery charger light is green. When the battery is fully charged, the battery charger light blinks green. If errors occur while charging, the battery charger light blinks amber. For information on resolving battery problems, see “Solving Problems” in your online User’s Guide. 14 Battery Charger Removing the Battery From the Battery Charger NOTICE: When you disconnect the AC adapter from the battery charger, hold the adapter cable connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. 1 Disconnect the AC adapter from the electrical outlet and the battery charger. 2 Slide the battery charger lock latch to the unlock position. 3 Slide and hold the battery charger latch release, and then gently pull the battery out of the battery charger connector. 4 Reinstall the battery in the computer: a Slide the battery into the bay until the battery latch release clicks. b Slide the battery lock latch into the lock position. Storing a Battery Remove any installed battery pack when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a...
Este manual também é adequado para os modelos :carregadores - X200 (4.12 mb)