Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack. After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off. • Nominal Voltage: 4.8 V • Capacity: 3.0 Ah • Lifetime: minimum 500 cycles at nominal charge of 500 mA • Temperature Ranges: Operating: 0 ° C to 50° C Quick Charging: 10° C to 40° C Trickle Charging: 10° C to 45° C Storage: -40° C to 60° C Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack. To prevent damage to Equipment or Battery: Fully charge before use. Keep the battery cool Do not dispose in open fire Observe polarity Do not solder directly to the cells Do not short circuit Store Batteries outside the Instrument BP130 Ni- MH Rechargeable Battery Pack Instruction Sheet This Rechargeable Battery Pack is designed for use with the Fluke ScopeMeter Model 124 and with Model 123 if the installed software is of version V2.00 or higher. Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack. After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off. • Nominal Voltage: 4.8 V • Capacity: 3.0 Ah • Lifetime: minimum 500 cycles at nominal charge of 500 mA • Temperature Ranges: Operating: 0 ° C to 50° C Quick Charging: 10° C to 40° C Trickle Charging: 10° C to 45° C Storage: -40° C to 60° C Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack. To prevent damage to Equipment or Battery: Fully charge before use. Keep the battery cool Do not dispose in open fire Observe polarity Do not solder directly to the cells Do not short circuit Store Batteries outside the Instrument BP130 Ni- MH Rechargeable Battery Pack Instruction Sheet This Rechargeable Battery Pack is designed for use with the Fluke ScopeMeter Model 124 and with Model 123 if the installed software is of version V2.00 or higher. Chapter 2 of the Users Manual of the ScopeMeter explains how to display the software version. This Chapter also explains how to exchange the Battery Pack. After installation, charge the Battery Pack for at least 7 Hrs. with the ScopeMeter switched off. • Nominal Voltage: 4.8 V • Capacity: 3.0 Ah • Lifetime: minimum 500 cycles at nominal charge of 500 mA • Temperature Ranges: Operating: 0 ° C to 50° C Quick Charging: 10° C to 40° C Trickle Charging: 10° C to 45° C Storage: -40° C to 60° C Performing a Refresh Cycles every 3 months, will contribute to the lifetime of the Battery Pack. To prevent damage to Equipment or Battery: Fully charge before use. Keep the battery cool Do not dispose in open fire Observe polarity Do not solder directly to the cells Do not short circuit Store Batteries outside the Instrument Do not dispose the Battery Pack with other solid waste. Used batteries should be disposed of by a qualified recycler or hazardous materials handler. Contact your authorized FLUKE Service Center for recycling information. To locate a Fluke Service Center, visit Fluke on the World Wide Web: fluke.com or call Fluke using any of the phone numbers listed below: +1-888-993-5853 in U. S.A. and Canada +31-40-2675200 in Europe +1-425-446-5500 4822 872 30730 Sept 2002 © 2002, Fluke Corporation, All rights reserved. Printed in the Netherlands All product names are trademarks of their respective companies. Do not dispose the Battery Pack with other solid waste. Used batteries should be disposed of by a qualified recycler or hazardous materials handler. Contact your authorized FLUKE Service Center for recycling information. To locate a Fluke Service Center, visit Fluke on the World Wide Web: fluke.com or call Fluke using any of the phone numbers listed below: +1-888-993-5853 in U. S.A. and Canada +31-40-2675200 in Europe +1-425-446-5500 4822 872 30730 Sept 2002 © 2002, Fluke Corporation, All rights reserved. Printed in the Netherlands All product names are trademarks of their respective companies. Do not dispose the Battery Pack with other solid waste. Used batteries should be disposed of by a qualified recycler or hazardous materials handler. Contact your authorized FLUKE Service Center for recycling information. To locate a Fluke Service Center, visit Fluke on the World Wide Web: fluke.com or call Fluke using any of the phone numbers listed below: +1-888-993-5853 in U. S.A. and Canada +31-40-2675200 in Europe +1-425-446-5500 4822 872 30730 Sept 2002 © 2002, Fluke Corporation, All rights reserved. Printed in the Netherlands All product n...