Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Save the carton for possible future use. Be sure to repack the system in its shipping carton to transport it outside your residence. Figure 1 What’s included in the carton Place the system on a firm and level surface. Its speaker drivers are shielded, which limits the possibility of video interference if it is placed near a computer or video screen. Dock inserts (5) Remote control Power cord SoundDockTM digital music system Power pack Introducing the SoundDockTM Digital Music System Introducing the SoundDockTM Digital Music System Getting it ready Before you enjoy the sound, you need to install an insert in the dock on the front of the system. Then you can plug the system in. To install an insert: 1. Check the bottom of each insert to identify the one that fits your iPod (Figure 2). Using the correct insert ensures a snug fit for your iPod. Figure 2 Labels on the five inserts 2. Position the selected insert over the dock. 3. Press on both sides of the insert until it rests firmly in place (Figure 3). Figure 3 Installing an insert You can remove and replace the insert with any of the five provided. This allows you to use the system with an iPod of a different size. For details, see “To remove an insert from the dock” on page 9. Introducing the SoundDockTM Digital Music System Introducing the SoundDockTM Digital Music System With the proper insert installed, you can now plug in the system. Be sure you can see the symbol on top of the small connector end (Figure 4). Insert it into the jack on the back of the system matching the direction of the arrows on this connector and on the system. Figure 4 Plugging in the system Match symbols To check for iPod compatibility For the SoundDockTM system remote control to work as intended with your iPod, it must be running Version 2.2 or later of the Apple software. To check your iPod for the software version currently installed, select Settings, About, Version on the iPod display. If you need to upgrade, simply visit the Apple iPod website and follow the instructions there for a free download. Go to: Experience the Sound Experience the Sound Using the system Your SoundDockTM digital music system is ready to go as soon as you plug it in. Simply set your iPod to play what you want and insert it into the dock on the front of the system (below). • You should hear the music immediately. If you do not, refer to “Troubleshooting” on page 10. • The + and – buttons on either side of the dock (right) allow you to adjust the system volume. • Whenever your iPod is docked in the system, it recharges (until fully charged). Note: When earphones are plugged into your iPod, sound comes from both the earphones and the system. Taking control Use the remote to control the sound as you move around the room. • Press once to turn off your iPod. It continues charging while in the dock. • Turn on your iPod and press to adjust the system volume. Press and hold for faster adjustment. • Press to move to the previous or next track. Press and hold to fast-forward or reverse the current track. • Press once to pause play; again to resume it. Press and hold to turn off your iPod. Other control options: • To mute the system – Set the system volume to its lowest level, or press to temporarily halt playback, or turn off your iPod. • To turn off the SoundDock system – Remove your iPod from the dock or unplug the system from the outlet. Using your iPod: • Your iPod navigation controls are fully functional while it is docked in the system. • Your iPod volume jog wheel changes the headphone volume only. It has no effect on the SoundDock system. 9 Reference English Dansk Deutsch Espanol Francais Italiano Nederlands Svenska Reference Maintaining the system Changing the remote control battery is the only regular maintenance that is required. You may also clean the system as needed. To replace the remote control battery Replace the remote control battery when it stops operating (normally every year or two), or its range seems reduced. Use only a Duracell, Eveready, Energizer, Maxell, Toshiba, or Shun Wo CR2032 or DL2032 3-volt lithium battery. Keep in mind that lighting and other room conditions, in addition to battery age, can affect the operating range of an infrared remote control. Figure 5 Inserting a new battery To clean the system Wipe the system using a soft dry cloth. You can also lightly vacuum the grille. • Do not use solvents, chemicals, or sprays. • Do not allow liquids to spill or objects to drop into any openings. To remove an insert from the dock 1. With your thumbs on the front of the dock near the Bose® logo, and your index fingers inside it, pinch until the rear of the insert lifts up (Figure 6). 2. Lift out the insert and replace it with the one you need. Figure 6 Removing an insert See operating instructionsfor types of battery to be used See operating instructionsfor types of battery to be used + Reference Reference Troubleshooting Problem What to do Your iPo...