Assessments - 5, GPA: 3.4
(
)
)
|
Facilidade de uso
GENERAL DESCRIPTIONSeries HLE and MLE loudspeakers are explosion-proof compression driver/horn assemblies engineered for high-efficiency voice and electronic signal communication in hazardous areas. Drivers, which are protected within a rugged die-cast aluminum housing, are available in 60-watt (HLE Series) and 30-watt (MLE Series) power handling versions. Models with Tsuf- fix include a factory-installed, internally mounted transformer (Note: To meet ULrequirements transformer must be factory installed). All models are equipped with 1.2" conduit access and an adjustable mounting bracket. Projectorhornsareavailableintwostylestomeetdispersionrequirements.ModelHLE/MLE- 30isahigh-quality,polycarbonateprojectorthatcreatesa120°x60°patternforwideareacoverage.ModelHLE/MLE-32isaspunaluminumbellprovidinga95°circulardistributionemphasis. Note:– For Canadian use (Price List page 17 Text) Drivers and projector horns are ordered and shipped separately. For performance accuracy, specifications are listed for assembled configurations. UNDERWRITERS' LABORATORY LISTINGSDRIVER CLASS / GROUP FOR ATMOSPHERE CONTAINING: HLE-1(T)Class 1 / Division 1 / Group C & D Gas Atmospheres (Including Ethyl, Ether, Gasoline Naphtha, Alcohols) MLE-1(T) HLE-3(T)Class 1 / Division 1 / Group B, C & D Gas Atmospheres (Including Ethyl, Ether, Gasoline Naphtha, Alcohols, MLE-3(T)Butane, Propane)plus,Hydrogen, Gas and Vapor, (Manufactured Gas) MODEL POWER FREQ.SOUND INTERNAL ASSEMBLYDRIVER HORN RATING RESPONSELEVEL* SENSITIVITY** DISPERSION IMPEDANCE XFMR SIZE(“T” versions only) HLE-1(T) HLE/MLE-3060 Watts 250 Hz- 109dB -18dBm 120 ° x 60 ° 16 Ohms 60 Watt Driver & HornHLE-3(T) HLE/MLE-30 Cont. 12 kHz 108dB Model T-18 14"W x 6"H x 171.2”DMLE-1(T) HLE/MLE-3030 Watts 300 Hz 107dB -21dBm 120 ° x 60 ° 8 Ohms 30 Watt (35.6 x 15.2 x MLE-3(T) HLE/MLE-30Cont. 14 kHz 106dB Model T-20 44.5cm) HLE-1(T) HLE/MLE-3260 Watts 190 Hz- 112dB -16dBm 95 ° 16 Ohms 60 Watt Driver & HornHLE-3(T) HLE/MLE-32Cont. 12 kHz 111dB Model T-18 161.2"Dia. xMLE-1(T) HLE/MLE-3230 Watts 200 Hz- 110dB -20dBm 95 ° 8 Ohms 30 Watt (42 x 54.6cm) MLE-3(T) HLE/MLE-32Cont. 10 kHz 110dB Model T-20* Measured 1 Watt / 1 Meter. ** As microphone; re 10 dynes / cm2 HLE-1 DriverHLE-1DrivermountedtoHLE/MLE-30Horn(orderseparately) HLE-1 Driver mounted to HLE/MLE-32 Horn (order separately) © 2007 Atlas Sound Printed in U.S.A. 000202 SL2-1421 167 ARCHITECT AND ENGINEER SPECIFICATIONS Explosion proof loudspeaker shall be UL Listed for use in specified hazardous locations and/or combustible atmospheres as classified by the National Electric Code. UL approved compression driver for 60 Watt distributed application shall be Atlas Sound Model HLE-1T or HLE-3T with internally mounted 60-watt transformer Model T-18. Transformer shall have primary impedance taps at 2000, 1000, 500, 250, 125 and 85 with a 45 Ohm tap for 45 Ohm line use only. Corresponding power taps for 70.7V line use shall be 2.5, 5, 10, 20, 40 and 60. Secondary impedance shall be 4, 8 and 16 Ohms. For voice-coil circuit applications, UL Listed 60 Watt Model HLE-1, or HLE-3 with 16 Ohm voice coil shall be specified. UL approved compression driver for 30-watt distributed application shall be Atlas Sound Model MLE-1T or MLE-3T with internally mounted 30 Watt transformer Model T-20. Transformer shall have primary impedance taps at 2500, 1300, 666, 333, 167, 89 and 45 Ohms. Corresponding power taps for 70.7V line use shall be 1.8, 3.7, 7.5, 15, and 30. Power taps for 25V line shall be 1.89, 3.7, 7, and 15. Secondary impedance shall be 8 Ohms. For voice-coil circuit applications, UL Listed 30 Watt Model MLE-1, or MLE-3 with 8 Ohm voice coil shall be specified. Driver and transformer, where applicable, shall be mounted within a heavy, cast aluminum housing. Voice coils shall be field-replaceable. Projector horn shall be a reflex type with polycarbonate re-entrant section. It shall be Atlas Sound Model HLE/MLE-30 for 120. x 60. sound dispersion or HLE/MLE-32 for 95. sound coverage. Driver and horn assembly shall have a frequency response of _______ with sensitivity of _______(measured at 10 dynes / cm2). Sound pressure level shall be a minimum of ________(measured at 1W/1M). Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 AtlasSound.com © 2007 Atlas Sound Printed in U.S.A. 000202 SL2-1421 ...
Este manual também é adequado para os modelos :Speakers - 60 and 30 Watt Explosion-Proof Loudspeakers HLE Series (560.68 kb)