Assessments - 5, GPA: 3.4
(
)
)
|
Facilidade de uso
AVC200512 English Francais 2 Names of the parts a Left speaker b Stand (L, R) c Right speaker d AUDIO IN plug e Power switch [OPR, ON/OFF] f Operation indicator [OPR] g Volume control h Bass sound output area Installation a Attach stand L to the left speaker and stand R to the right speaker. ± Horizontal positioning . Vertical positioning . Carrying Using the batteries 1. Open the battery lid b. 2. Insert the 4 batteries (not included). Press down on the - end. Match the poles (+ and -). 3. Close the battery lid b. If rechargeable batteries are to be used, rechargeable batteries manufactured by Panasonic are recommended. When to change the batteries Replace with new batteries when the [OPR] indicator starts to fade and/or flash. Also replace when sound becomes distorted or fades. Using the AC adaptor Connect the AC adaptor (not included). c DC IN jack (right speaker) • Use a DC 6 V (1.25 A) AC adaptor. • Using an AC adaptor with a capacity lower than 1.25 A may cause the AC adaptor to fail. • The power source switches over to AC power if you connect the AC adaptor even when batteries have been inserted. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Connection and usage 1. Turn down the volume of the digital audio player, etc. d, and insert the AUDIO IN plug e (3.5 mm stereo) into the phone jack f. 2. Adjust the volume to a level at which the sound from the sound source will not be distorted. 3. Turn down the volume level of [VOLUME], and set the [OPR] switch to “ON”. The [OPR] indicator turns green. 4. Adjust [VOLUME]. If the sound is distorted, turn down the volume of the unit or the sound source. Using the unit with the sound distorted may cause the unit to fail. Specifications Speaker unit: 40 mm (1-9/16 in.) full range Impedance: 4 . Frequency range: 140 Hz - 20 kHz (at –16 dB) Output power: 2 W + 2 W (10% THD, 1 kHz) Power requirements: DC 6 V, 4 batteries (R03/LR03, AAA) or AC adaptor (6 V, 1.25 A) Approximate play times: 60 hours (alkaline batteries) Plug: L-type 3.5 mm (1/8 in.) stereo Cord length: 0.5 m (1.6 ft.) Dimensions (W . H . D): 140 mm . 56 mm . 30 mm (without stand) (5-1/2 in. . 2-3/16 in. . 1-3/16 in.) (without stand) 140 mm . 56 mm . 82 mm (using the stand) (5-1/2 in. . 2-3/16 in. . 3-1/4 in.) (using the stand) 144 mm . 56 mm . 60 mm (carrying) (5-11/16 in. . 2-3/16 in. . 2-3/8 in.) (carrying) Mass (without batteries): L: 120 g (4.2 oz.), R: 140 g (4.9 oz.) Note The actual life of the battery depends on operating conditions. Specifications are subject to change without notice. Mass and dimensions are approximate. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Telephone No.: 1-800-211-7262 THE FOLLOWING APPLIES ONLY IN CANADA This Class B digital apparatus complies with Canadian ICES-003. CE QUI SUIT NE S’APPLIQUE QU’AU CANADA Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Nomenclature des pieces a Haut-parleur gauche b Support (L, R) c Haut-parleur droit d Fiche AUDIO IN e Interrupteur d’alimentation [OPR, ON/ OFF] f Temoin de fonctionnement [OPR] g Commande de volume h Zone de sortie des graves Installation a Fixez le support L au haut-parleur gauche et le support R au haut-parleur droit. ± Positionnement horizontal . Positionnement vertical . Transport Utiliser les piles 1. Ouvrez le couvercle du...