Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
1 Press TUNER/BAND to select a band, and press + DOWN or > UP to select a station. 2 Press 11 SET to store the station. A preset number beginning from 1 in consecutive order for each band is assigned to the station. Preset number 3 Repeat steps 1 and 2. The next station will not be stored if a total of 32 preset stations for all the bands have already been stored. “ \ ,, # .-. p:.....,, .;, 4., =..,.,,! . \ ,, # .-. p:.....,, .;, 4., =..,.,,! . PRESET”’N’UM’BE’RTUNiNG” “ Use the remote control to select the preset number directly. 1 Press BAND while pressing SHIFT to select a band. 2 Press numbered buttons O-9 and +1Oto select a preset number. Example: To select preset number 20, press +10, +10 and O. To select preset number 15, press +10 and 5. Selecting a preset number on the main unit Press TUNEFUBAND to select a band. Then, press > PRESET repeatedly or turn MULTI JOG. Each time a PRESET is pressed, the next ascending number is selected. To clear a preset station Select the preset number of the station to be cleared. Then, press n CLEAR, and press 11 SET within 4 seconds. The preset numbers of all other stations in the band with higher numbers are also decreased by one. 2 1 = EJECT N DOWN, UP Deck 1 : Use Type I (normal) tapes only. 1 Press TAPE and cassette holder. press A EJECT to open the Insert a tape with the exposed side down. Push the cassette holder to close. 2 Press > to start play. Only the side facing out from the unit can be played back. The selected deck number Tape counter To select a playing deck When tapes are loaded in both decks, press TAPE first to selecl a deck. The selected deck number is displayed. To stop play, press n . To pause play (deck 2 only), press 1I. To resume play, press again. To fast forward or rewind, press 44 or>. Then press n tc) stop the tape. To start play when the power is off (Direct Play Function) Press TAPE. The power is turned on and play of the inserteci tape begins. To set the tape counter to 0000 Press 9 CLEAR in stop mode. The counter is also set to 0000 when the cassette holder is opened. When tapes are loaded in both decks After playback on deck 1 finishes, the tape in the deck 2 will start to play without interruption and will stop at the end of the tape. (Continuous play) ENGLISH 8 I Press CD, then press A OPEN/CLOSE to open the disc compartment. Load disc(s) with the label side up. To play one or two discs, place the discs on tray 1 and 2. To tdav three discs, press DISC CHANGE to rotate the trays after placing two discs. Place the third disc on tray 3. Close the disc compartment by pressing A OPEN/CLOSE. Tray 1 DISC CHANGE~ Tray number of the disc to be played Total playing time Total number of tracks Load discs. To plav all discs in the disc com~artment, press -. Play begins with the disc on tray 1. Number of track being played Elapsed playing time To dav one disc only press DISC DIRECT PLAY 1-3. The selected disc is played once. To stop play, press 1. To pause play, press 11. To resume play, press again. To sesrch for a particular point during playback, keep + or > pressed and release it at the desired point. To skip to the beginning of a track during playback, press 4 or * repeatedly or turn MULTI JOG. To remove discs, press 4 OPEN/CLOSE. To start play when the power is off (Direct Play Function) Press CD. The power is turned on and play of the loaded disc(s) begins. When A OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened. To check the remaining time During play, press EDiT/CHECK on the remote control while pressing SHIFT. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above. Selecting a track with the remote control 1 Press DISC DIRECT PLAY 1-3 to select a disc. 2 Press numbered buttons O-9 and +1 O to select a track. Example: To select the 25th track, press +10, +10 and 5. To select the 10th track, press +1 O and 0. The selected track starts to play and continues to the end of that disc. Replacing discs during play While one disc is playing, the other discs can be replaced without interrupting play. 1 Press DISC CHANGE. 2 Remove the discs and replace with other discs. 3 Press A OPEN/CLOSE to close the disc compartment. . When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray. l Do not place more than one compact disc on one disc tray. . Do not tilt the unit with discs loaded. Doing so may cause malfunctions. 9 ENGLISH Use the remote control. RANDOM play All the tracks on the selected disc or all the discs can be played randomly. REPEAT play A single disc or all the discs can be played repeatedly, Press RANDOM/REPEAT while pressing SHIFT. Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REPEAT play — ~ lights up on the display. RANDOM/REPEAT play — RANDOM and% light up on the display. Cancel — RANDOM and G disappear from the display. To ~lav all discs...
Este manual também é adequado para os modelos :Speakers - CX-NA303 (8.81 mb)
Speakers - NSX-A304 (8.81 mb)