Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
1/4" RCA, R & L balanced XLR 6: 1/4" TRS Direct Input jacks Outputs: 12: 1/4" TRS Stereo jacks 6: 1/8" (3.5 mm) TRS Stereo jacks Max Gain: 20 dB/Channel Output Power: 972 mW/side, 1944 mW/Channel ( @ 32 Ohms ) Frequency Response: DC - 30 kHz S/N Ratio: 90 dB THD: <.008% IMD: <.008% Phase Shift (In to Out): 0 deg. Slew Rate: 25 V per microsecond Second Crosstalk: - 65 dB Power 12 VAC (Rolls Model PS12) Weight: 7 lbs (3KG) Size: 19” x 1.75” x 6.5” (48cm x 4.5cm x 17cm) INTRODUC TION T hank y ou f or y our pur chase of the Rols RA62c St er eo Headphone Amplifi er . T he ROLLS RA62c is a six - chanel headphone/earphone amplifi er f or pr of essional audio monit oring . A variet y of input options ar e a v ailable including 1/4” , RCA, and balanc ed XLR. Sinc e the MONO/STEREO swit ch is af t er the pan c o ntr o l , it wil mix 2 MONO sig nals and their balanc e can be adjust ed with the P an c o ntr o l . W ith the addition of r ear panel Dir ec t I nput c onnec t ors , each channel ma y mix a sec ond st er eo sig nal . This manual assumes the user has a basic knowledge of audio electronic equipment. INSPECTION/WARRANTY 1. Unpack and inspect the RA62c box and package. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. 2. Please visit our website at and click on the Register Your Warranty Here text. Fill out the warranty information to ensure coverage of your new RA62b. DESCRIPTION FRONT PANEL Note: Descriptions for Channel One through Channel Six are identical. OUTPUTS 1 - 6 : 1/4” and 1/8” (3.5 mm) Tip-Ring-Sleeve jacks for connection to a standard pair of headphones or earphones. These jacks may be used simultaneously. CLIP: Red LED indicating circuit overload in that channel. MIX: Adjusts the relative amount of signal from the Main Inputs and the Direct Input of that channel. VOLUME 1 - 6: Controls the amount of output signal from the indicated channel. MONO/STEREO SWITCH: When this switch is pressed in, the Right and Left channels are summed together providing a mono output signal. MAIN INPUT PAN: Controls the relative amount of Right/Left signal sent to the Output channels from the Main Input. MAIN INPUT: 1/4” TRS input jack - parallels the rear panel Right and Left 1/4’ Input jacks. POWER: Push switch - turns the RA62c on and off . POWER LED: Indicates that the RA62c is connected to the power supply and is on. REAR PANEL 12 VAC INPUT: Connects to the Rolls PS12 AC adapter (Included). INPUTS:Left and Right - Balanced XLR jacks - 1/4” Balanced / Unbalanced jacks - RCA Unbalanced jacks Note: Descriptions for Channel Six through Channel One are identical. DIRECT INPUT: 1/4” TRS jacks which directly access the channel’s heaphone output circuitry, and is mixed to the corresponding channel MIX control. This is a stereo jack and requires a TRS stereo signal. OUTPUT: 1/4” TRS jack - parallels front panel 1/Output jack. CONNECTION Connect the AC adapter to an outlet with the proper voltage. Determine which input configuration you will use; either discreet right/left, TRS stereo, or mono. For a discreet right/left input configuration, connect a balanced XLR, 1/4” , or RCA plug containing the ” Right” portion of the stereo signal to the Right Main Input. Connect a balanced XLR, 1/4” , or RCA plug containing the “Left” portion of the stereo signal to the Left Input. For a TRS stereo input configuration, connect a Tip- Ring-Sleeve stereo plug into the front panel STEREO IN Input, or the rear panel LEFT Input. This cable may come from a mixer’s headphone output for example. To send a mono signal to the RA62c, connect an XLR jack to either Main Input, or a single 1/4” Tip-Sleeve plug into rear panel Right Input and press in the front panel MONO/STEREO switch. This mono signal will be fed to both the right and left sides of the headphone outputs. DIRECT INPUTS The unique RA62c Direct Inputs have been provided as a way for you to mix a separate, stereo signal with the Main Input signal - giving each listener their own custom headphone mix. To utilize this feature - connect a 1/4” TRS stereo signal, such as a monitor mix, to the listener’s Direct Input. Mix the Main Input signal with this Direct Input signal via the front panel MIX control CAUTION: Plugging a mono 1/4” TS plug into the Headphone Outputs may cause permanent damage to the unit because one side would be shorted to ground. NEVER PLUG A MONO PLUG INTO ANY OF THE HEADPHONE OUTPUTS. WARNING USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE In order to use this system safely, avoid prolonged listening at excessive sound pres- sure levels. Please use the following guidelines established by the Occupational Safety Health Administration ( OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs. 90 dB SPL at 8 hours 95 dB...