Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Press the button (6) or button (23) on the remote controller once again to keep power in standby status. B. VOLUME Selection 1. Press the VOL+ button (8) on the front panel of the main unit or VOLUME + button (31) on the remote controller to maximize the sound output. Standby Indicator (9) on the front panel will light up and flash when the Volume is increased to Maximum accordingly, 2. Press the VOL- button (7) on the front panel of the main unit or VOLUME - button (41) on the remote controller to minimize the sound output. Standby Indicator (9) on the front panel will light up and flash when the Volume is decreased to Minimum accordingly, C. BASS Selection 1. Press the BASS + button (30) on the remote controller to maximize the Bass output. Standby Indicator (9) on the front panel will light up and flash when the Bass Output is increased to Maximum accordingly, 2. Press the BASS - button (32) on the remote controller to minimize the Bass output. Standby Indicator (9) on the front panel will light up and flash when the Bass Output is decreased to Minimum accordingly, D. TREBLE Selection 1. Press the TREBLE + button (39) on the remote controller to maximize the Treble output. Standby Indicator (9) on the front panel will light up and flash when the Treble Output is increased to Maximum accordingly, 2. Press the TREBLE - button (40) on the remote controller to minimize the Treble output. Standby Indicator (9) on the front panel will light up and flash when the Treble Output is decreased to Minimum accordingly. E. BALANCE Selection 1. Press the BALANCE L button (26) on the remote controller to minimize the Left speaker output. 2. Press the BALANCE R button (35) on the remote controller to minimize the Right speaker output. 7 -Q- 4025.qxd 13.07.2005 17:51 Page 8 ENGLISH 3. Standby Indicator (9) on the front panel will light up and flash when the Balance Output is adjusted almost to the Centre status. F SURROUND DECODER Selection 1. Connect and place Centre and Rear speakers properly. 2. Press on SURROUND button (4) on the front panel of the main unit or (24) on the remote controller to select Surround Decoder for Home Theatre system effects. SURROUND Mode SURR A Indicator SURR B Indicator 3.1CH Stereo On Off 5.1CH Off On 5.1CH (Strengthened) On On Note: (1) Rear speakers output are off when 3.1CH Stereo mode is selected. (2) The system is based on 2.1 Channels output. SURROUND is of no function at 5.1 Channels status. G. CENTRE SPEAKER Selection 1. Press C + button (28) on the remote controller to maximize the Centre Speaker output and STANDBY indicator (9) will light up and flash. 2. Press C - button (38) on the remote controller to minimize the Centre Speaker output and STANDBY indicator (9) will light up and flash. H. REAR LEFT SPEAKER Selection I. Press RL + button (27) on the remote controller to maximize the Rear Left Speaker output and STANDBY indicator (9) will light up and flash. 2. Press RL - button (29) on the remote controller to minimize the Rear Left Speaker output and STANDBY indicator (9) will light up and flash. I. REAR RIGHT SPEAKER Selection 1. Press RR + button (36) on the remote controller to maximize the Rear Right Speaker output and STANDBY indicator (9) will light up and flash. 2. Press RR - button (37) on the remote controller to minimize the Rear Right Speaker output and STANDBY indicator (9) will light up and flash. J. 5.1 CHANNELS INPUT Selection 1. Connect the system properly. 5.1 Channels audio output must comply with 5.1 Channels audio input. (Note: AC-3/dts will decode 5.1 Channels output.) 2. Press INPUT button (25) on the remote controller to shift the status for audio input to 5.1CH channels input. 3. Adjust all output settings including VOLUME, BASS, TREBLE (if necessary) now to enjoy the wonderful and tremendous Home Theatre effects. K. MUTE Selection 1. Press the MUTE button (33) on the remote controller once to keep the performance silent. 2. MUTE indicator (9) on the front panel will then light up and flash. 3. Press it again to resume the performance. L. PRESET Selection Press on PRESET button (34) on the remote controller will reset all settings including BALANCE, CENTRE Speaker output, REAR Speaker output to 0dB status preset by the manufacturer. TROUBLE SHOOTING 1. NO OUTPUT (1) Check whether the system is connected correctly. (2 ) Check whether the Volume is set at minimum. Adjust it accordingly. (3) Check whether the Audio Input is in PLAY mode. 2. FRONT LEFT SPEAKER SILENT (1) Check whether the system is connected correctly with the Front Left speaker. (2) Check whether the Balance function is switched off. Adjust it accordingly (3) Check whether the system is connected correctly with the audio source. 3. FRONT RIGHT SPEAKER SILENT (1) Check whether the system is connected correctly with the Front Right speaker. (2) Check whether the Balance function is switched off. Adjust it accordingly (3) Check whether ...
Este manual também é adequado para os modelos :Speakers - VT-4035 SR (2.72 mb)
Speakers - VT-4025-4035 SR (2.72 mb)