We have provided an Auxiliary Input Jack on (he back panel of this system and included a stereo connection cable so that you can still connect non-docking iPods®, other MP3 players, or personal CD players to this system. KB a9* Locate the stereo connection cable supplied with this system. Connect one end of the 3.5mm stereo cable into the auxiliary input jack (AUX) located on the back of the unit, and other end to the headphone or line out jack on your portable audio device. Set the POWER but

The display will change from time to radio frequency. Set the BAND selector to the desired band, AM or FM Auto. Rotate the TUNING control until the display shows the desired AM or FM station frequency, Turn theTUNiNG control clockwise to select higher numbered frequencies or counter-clockwise to select lower numbered frequencies. The FM STEREO indicator will light when you tune to an FM Stereo station. Rotate the VOLUME control to increase or decrease the volume level. If you want to increase

6.) When you are finished listening press the Power button on the main unit or the remote control to switch the power ‘Off’. The display lighting turns off and the display changes from radio frequency to the correct time. NOTE: The system remembers the last station and the volume level that you had selected before the power was switched ‘Off’ and automatically returns to that station and volume level when the power is switched ‘On’ again. 17 iP550_041907.p65 17 19/4/2007, 17:56 Antenna Informati

14.) Volume + Button. 15.) Volume – Button. 16.) Skip Forward / Tuning (Up) Button. 17.) Skip reverse / Tuning (Down) Button. 18.) Band/iPod Play Button. 19.) iPod® Shuffle USB Connector. 20.) iPod® 30-Pin Connector. 21.) Time/Display Button. 22.) Memory Button. 23.) Preset + Button. 24.) Preset – Button. 9 iP550_041907.p65 9 19/4/2007, 17:56 LCD Display 1 2 3 4 5 6 7 8 9 10 11 121314 1.) Volume Level (00-64), Sleep Time, Radio Channel Display. 2.) VOLUME Indicator. 3.) MEMORY Indicator. 4.) FM

6.) Press the Volume + or Volume – buttons to select the desired wake up mode: BUZ (Buzzer), RAD (Radio), or iPod. 7.) After 10 seconds the alarm display will stop flashing and the correct time display reappears. 35 iP500_042307.p65 35 23/4/2007, 17:01 To Activate or Deactivate The Alarm Press the Alarm On/Off button once on the top panel, or on the remote control, to activate the alarm. One of the alarm mode icons will appear in the time display to confirm that the alarm is ‘On’. Press the Alar