Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Once it was up side down, it cannot be fixed. 4 Electrical connections '0 s| *0 >U n aD <1 « «0 ! 4]>0 r a0 *11 B «Q Ignition key I + 12VDC When ON/ACC I Ground Lead Mot or/Electric Antenna relay control Lead Amplifier relay control Lead To car battery (-t-) Continuous t- 12VDC Rriit Spanker iRear'i U A 0 © © Right Speaker Left Speaker (Fmrt) (Frnrt> Left Speaker (Rsii) R(Rcd] UWhitel /■wiiMUMinaiirN ■B) Amplifier Originalwiring Vollnw Red Mod ¡fiedwiring Yellow —— Yellow Red -4 v* Red M ,- Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or else the memory of the unit may be lost after you power off. Contact your authorized car dealer before installing this unit. 5 Using the ISO Connector l.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2.For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code table below for speaker and power cable connections. Location FUNCTION Connector A Connector B 1 Rear Right(+)—Purple 2 Rear Right(-)—Purple/Black Stripe 3 Front Right(+)—Gray 4 ACC+/red Front Right(-)---Gray/Black Stripe 5 Auto Antenna/blue Front Left(+)—White 6 Front Left((-)—White/Black Stripe 7 Battery 12V (+)/yellow Rear Left(+)—Green 8 Ground/black Rear Left(-)—Green/Black Stripe 6 Panel controls 13 24 25 7 1. Power on: press any button on the panel except A to turn on the unit. Press more than 2 seconds to power off. 2. Multi-Control. Press to select VOL/BAS/TRE/BAL/FAD, rotate the Multi-Control to adjust level. Press more than 2 seconds to Menu mode. MP3 track / file search. 3. Band switch: FM1 □ FM2 □ FM3 □ FM(OIRT) □ AM1 □ AM2. 4. 5 Radio tune/ Track seek. To fast search within a track/skip to next or previous track 6. AF (Alternative Frequencies) button. 7. TA (Traffic Announcement) button. 8. PTY (Program Type) button. 9. LCD screen. 10. Panel release. 11. SD/MMC card slot. 12. iPod, USB connector. 13. Radio preset. Hold for more than 2 seconds to store station. 14. MP3 track +10 up. 15. MP3 track -10 down. 16. Track random play. 17. Track repeat play. 18. Intro play (10 seconds). 19. Play/pause. Top play (press more than 2 seconds). 20. AMS: Radio preset scan/Radio Audio scan/SEARCH: MP3 track/ file search 21. Radio/Disc play (when disc is in)/AUX-in (optional)/USB drive (when inserted)/MEM card (when inserted). 22. Display switch. 23. Mute: press again to cancel. 8 24. Disc eject. 25. Slot for disc. 26. RESET Button. Press the Reset button with a pointed object to reset the unit to the original status. Press the RESET button will erase the clock setting and stored stations. 27. Panel status indication: When the panel slide down it will light up. When the panel detached from body it will flash. 9 Button tips Disc load/eiect Load: press GO to flip down the panel. Insert the disc into the slot. Eject: Press G51 to flip down the panel. Press ® to eject the disc. Radio To fine tune the radio, press m or briefly. To search the station automatically, press m or for more than 0.5 second ►►I Disk playback Track skip: press m or briefly to go to the next or previous track. Track seek: press m or for more than 0.5second to seek the forward or previous track. AMS: Auto Memory Store Press briefly to scan the preset station 1-6 for 5 seconds each. Hold more than 2 seconds, the 6 strongest available station will be automatically saved in the memory of preset button 1-6. DISP Viewing Clock Time During Radio/Disc Playback Press DISP (once for Radio mode or twice for other modes),display shows the clock time after 5 seconds. Set clock Press DI SP button, time displays. Press again more than 2 seconds, time display blinks. Rotate the Multi-Control clock wise to set hours. Rotate the Multi-Control counter-clockwise to set minutes. Press DISP again to exit the clock setting. DISP 10 USB/SD/MMC MP3 playback_ 1.Loading SD/MMC Card Insert the SD/MMC card into the slot, with the front side at right. The unit will display the music automatically and the LCD will show MEM-CARD. 2.Take out SD/MMC Card Push SRC button and switch to non MEM-CARD mode, then push SD/MMC card, take out the card when part of the card flip up. 3.Loading USB equipment Open the rubber cap, put the USB into the connector the head unit will display the music, stored in the USB equipment, and the LCD will show USB-DRIV. 4.Take out USB equipment Push the SRC button and switch to non USB-DRIV mode, then take off the USB equipment, close the rubber cap. 11 USB/SD/MMC Notes: USB functions (flash memory type) MP3 music play (1) SD/MMC card support (2) USB f...