Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
— Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. CAUTION Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product. In addition to ordinary CDs, CD-Rs or CD-RWs can be read by this unit. However, NEVER use a CD-R or CD-RW that contains no data or data in the wrong format, such as MP3 or other computer files. TABLE OF CONTENTS BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT ..................................................... 2 RADIO OPERATION ................................................. 3 CD PLAYER OPERATION ........................................ 4 AUXILIARY EQUIPMENT ......................................... 5 OTHER FUNCTION .................................................. 5 TROUBLESHOOTING .............................................. 5 MAINTENANCE ........................................................ 5 SPECIFICATIONS .................................................... 6 Note Some buttons are assigned two or more functions. For detailed descriptions, refer to the related pages. CD Notes • Playing a defective or dusty CD can cause dropouts in sound. • Hold CDs as illustrated. • Do NOT touch the unlabeled side. • Do NOT attach any seal, label or data protection sheet to either side of CD. • Do NOT expose a CD to direct sunlight or excessive heat. • Wipe a dirty CD from the center outward with a cleaning cloth. Never use solvents such as benzine or alcohol. • This unit cannot play 3-inch (8 cm) CDs. • NEVER insert a 3-inch CD contained in the adapter or any irregularly shaped CD. The unit may not be able to eject it, resulting in a malfunction. 1 11 ENGLISH ENGLISHENGLISH BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT PWR/MUTE SEL DISP SRC AUDIO CONTROL i/k BAND Turning the unit on/off • Press PWR/MUTE to turn on the unit. The unit also turns on when you insert a CD. • Press and hold PWR/MUTE until the unit turns off. Note Most operations described in this manual require the unit to be turned on before starting the operation, unless explicitly stated otherwise. Changing the source mode 1 Press SRC. Pressing SRC cycles through source modes in the following order: FM1 (FM2/FM3/AM1/AM2) > CD* > AUX ^ * “CD” does not appear in the display when there is no CD in the unit. Adjusting the volume 1 Turn AUDIO CONTROL. VOL (volume) indicator flashes. Muting the sound 1 Press PWR/MUTE briefly. MUTE indicator flashes. To restore volume, briefly press PWR/MUTE again. Adjusting sound You can select the following modes for adjusting sound depending on the music you listen to: BASS (low frequencies), TRE (high frequencies), BAL (left/right), FAD (front/ rear) and H-BASS (high bass). 1 Press SEL repeatedly to select the mode to be adjusted. Pressing SEL cycles through the modes. The selected mode’s indicator flashes. 2 Turn AUDIO CONTROL to increase/decrease the level or to select on/off for the selected mode. Note Adjust the level or select on/off within 5 seconds, or the selected mode will return to previous state. Aligning the source levels (Source Level Adjuster) Volume may vary each time you change the source mode. In this case, you can align each source mode’s volume to almost the same level. 1 Press SRC or BAND repeatedly to select the desired mode. 2 Press DISP while pressing SEL. “LA 0” appears in the display. 3 Turn AUDIO CONTROL to adjust the level. Note Adjust the level within 5 seconds, or the selected mode will be canceled. Restoring the factory settings 1 Turn off the unit. 2 Press and hold DISP until “LA --” appears in the display. Note You can restore the factory settings only for VOL, BASS, TRE, BAL, FAD, and H-BASS, and aligned source volume levels. Muting button beep sounds 1 Turn off the unit. 2 Press and hold SEL until “bEEP” appears in the display. 3 TurnAUDIO CONTROL to select on (level indicators appear) or off (level indicators disappear). 4 Press SEL. ENGLISH ENGLISH ENGLISHENGLISH 2 22 Setting the clock 1 Press and hold DISP until the clock indicator flashes in the display. 2 Press i (to set hour) or k(to set minute), and then turn AUDIO CONTROL. 3 Press DISP. Displaying the clock 1 Press DISP. To return to the former display, press DISP again. RADIO OPERATION Tuning in to a station (Seek/Manual Tuning) LO i/k BAND Stereo indicator Local indicator Band indicator Frequency indication 1 Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2). 2* Press i(to move to higher frequencies) or k(to move to lower frequencies) to tune in to a station. “ST” appears in the display when an FM station is broadcasting in stereo, and receiving conditions are good. *Seek Tuning and Manual Tuning • Press and hold ior kuntil seek Tuning starts. The unit locates a station automatically (Seek Tuning). ...