Assessments - 4, GPA: 4.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. *1 When Info (Information) “All” is set: 1 Set AF/TA, then store the station with BTM or – “TP” lights up while “TP” is received. manually. – “TA”/“AF” lights up while “TA/AF” is on. *2 While receiving the RDS station, “ RDS” is displayed on the left of the frequency indication. continue to next page t Presetting the volume of traffic announcements You can preset the volume level of the traffic announcements so as to not miss hearing them. 1 Rotate the joystick to adjust the volume level. 2 Press and hold (AF/TA) until “TA Vol” appears. Receiving emergency announcements With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Staying with one regional programme — REG When the AF function is on: this unit’s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional programme’s reception area, set “Regional off” in setup during FM reception (page 20). Note This function does not work in the UK and in some other areas. Local Link function (UK only) This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. 2 Within 5 seconds, press again a number button of the local station. Repeat this procedure until the local station is received. Selecting PTY 1 Press (PTY) during FM reception. The current programme type name appears if the station is transmitting PTY data. 2 Push the joystick up/down until the desired programme type appears. 3 Press the joystick. The unit starts to search for a station broadcasting the selected programme type. Type of programmes News (News), Current Affairs (Current Affairs), Information (Information), Sport (Sports), Education (Education), Drama (Drama), Cultures (Culture), Science (Science), Varied Speech (Varied), Pop Music (Popular Music), Rock Music (Rock Music), Easy Listening (Easy Listening), Light Classics M (Light Classical), Serious Classics (Classical), Other Music (Other Music Type), Weather & Metr (Weather), Finance (Finance), Children’s Progs (Children’s Programmes), Social Affairs (Social Affairs), Religion (Religion), Phone In (Phone In), Travel & Touring (Travel), Leisure & Hobby (Leisure), Jazz Music (Jazz Music), Country Music (Country Music), National Music (National Music), Oldies Music (Oldies Music), Folk Music (Folk Music), Documentary (Documentary) Note You cannot use this function in countries/regions where no PTY data is available. Setting CT 1 Set “CT on” in setup (page 20). Notes • The CT function may not work even though an RDS station is being received. • There might be a difference between the time set by the CT function and the actual time. Bluetooth function Before using the Bluetooth function Menu operations of the Bluetooth function The Bluetooth settings can be configured from the Bluetooth function menu or CALL menu. Menu operations can generally be performed using the joystick. 1 Press (Bluetooth) or (CALL). The Bluetooth function menu or CALL menu appears. 2 Push the joystick up/down until the desired setting item appears, then push it right. The digital indication moves to the right (setting selection) side. 3 Push the joystick up/down to select the setting, then press it. The setting is complete. 4 Press (Bluetooth) or (CALL). The normal display appears. To input a character Push the joystick up/down to select a character, and push left/right to move the cursor. The characters that can be input are A – Z, a – z, 0 – 9 and a blank space. Configuring Bluetooth Settings Before connecting to a Bluetooth device, configure the Bluetooth Settings on this unit. 1 Press (Bluetooth). The Bluetooth function menu appears. 2 Select “Bluetooth Settings.” 3 Select the desired menu. 4 Select the setting. 5 Press (Bluetooth). Bluetooth Settings menu “z” indicates the default settings. Signal To switch the Bluetooth signal output of this unit to “ON” or “OFF.” – “ON”: to output the Bluetooth signal (RF 2.4 GHz). –“OFF” (z): to not output the Bluetooth signal (RF 2.4 GHz). Be sure to set to “ON” when you connect to the Bluetooth device. Visibility To allow other Bluetooth devices to search for this unit. – “Show”: to allow the other device to search. –“Hide” (z): to not allow the other device to search. Be sure to set to “Show” when you search for this unit from a Bluetooth device. Device Name To change the name of this unit displayed on connected device. (Default setting: “Xplod”) Select “Rename” and input characters. Up to 12 characters can be input. To restore “Xplod,” select “Default” c “yes.” Note For details on the settings of other Bluetooth devices, see their respective manuals. Pairing and connecting this unit with a Bluetooth device When connectin...