Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
Audio Setup Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio setup item Turn the [VOL] knob. Adjustment Item Display Range Low Pass Filter "LPF" 80/120/160/Through Hz Volume offset "V-OFF" –8 — ±0 (AUX : –8 — +8) . • Volume offset: Sets each source’s volume as a difference from the basic volume. 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Bass Boost Bass sound can be enhanced by one-touch operatin. Press the [B.BOOST] button. When you press the button once, the current Bass Boost setting is displayed. Each time you press the button, the Bass Boost setting alternates. Setting Display Bass Boost 1 "BB-L L1" Bass Boost 2 "BB-L L2" Bass Boost off "BB-L OFF" 8 | English Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type Display OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" For the OEM speaker "SP OEM" 4 Exit Speaker Setting mode Press the [VOL] knob. Switching Display Changing the information displayed. 1 Enter Switching Display mode Press the Control knob for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob towards [4] or [.]. In Tuner source Information Display Program Service name or Frequency "FREQ/PS" (FM) Radio text, Program Service name or "R-TEXT" Frequency (FM) Frequency (MW, LW) "FREQ" Clock "CLOCK" In CD & External disc source Information Display Disc title "D-TITLE" Track title "T-TITLE" Track number & Play time "P-TIME" Clock "CLOCK" In Audio file source Information Display Song title & Artist name "TITLE" Album name & Artist name "ALBUM" Folder name "FOLDER" File name "FILE" Track number & Play time "P-TIME" Clock "CLOCK" In Standby/ Auxiliary input source Information Display Source name "SRC NAME" Clock "CLOCK" 3 Exit Switching Display mode Press the Control knob. . • If the selected display item does not have any information, alternative information is displayed. • When you select the clock display, the display setting of each source will be changed to the clock display. • Album name cannot be displayed in WMA file. English | 9 General features Subwoofer Output Turning the Subwoofer output ON or OFF. Push the Control knob toward [AM] for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF. When it is ON, "SW ON" is displayed. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to forward and remove it. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. . • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to
Unidade - KDC-W5037 (1.16 mb)