Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
3). Note: the control panel must be attached into the T-Joint. 2. Press the right side of the control panel until a “click” sound is heard. 3. Close the panel. Caution: DO NOT insert the control panel from the right side. It can damage the control panel. The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel. 6 Electrical connections Notes: • In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high volume level. • Prohibit to make the conductors of auto antenna and ground touch with each other. 7 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. connection for speaker Location FUNCTION Connector A Connector B 1 Rear Right(+)—Blue 2 Rear Right(-)—Blue/White Stripe 3 Front Right(+)—Grey 4 Battery 12V (+)/yellow Front Right(-)—Grey/White Stripe 5 Auto Antenna/Orange Front Left(+)---Green 6 Panel light/White Front Left((-)—Green/White Stripe 7 ACC+/red Rear Left(+)—Brown 8 Ground/black Rear Left(-)—Brown/White Stripe 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect may cause serious damage to this unit. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code table below and power cable connections. 8 Accessories № Name pcs 1 Hexagon nut M5 T (3.5 mm) 1 2 Mounting box (0.6 mm) 1 3 Left key (1.0 mm) 1 4 Right key (1.0 mm) 1 5 Metal bar (0.8 mm) 1 6 ISO connector 1 7 Plain washer 0=5 mm 1 8 Carrying case 1 9 Outer trim ring 1 10 Spring washer 0=5 mm 2 11 Screw 05X5 mm 4 12 Screw 05X25 mm 1 13 Screw M5 05X29.3 mm 1 14 Customer information 1 15 Warranty card 1 16 Instruction manual 1 9 Panel controls 18 19 ' 2 4 :17 3 ) 7 1 8 9 16 10 11 12 13 14 15 6 5 1. OPEN BUTTON 2. VOL KNOB / SEL BUTTON 20 Rotate it clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Press it repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD Rotate VOL knob to adjust each mode. Push more than 2 seconds to Menu mode. MP3 track/ file/ character search ESP 45s/120s 3. LOC button Press to select: LOCAL or DISTANCE. 4. Display 10 5. 9/: buttons In Disc mode press the buttons shortly to go to previous/next track. Press and hold them to start fast backward/ forward rewind. In Radio mode press the buttons shortly to search the stations manually. Press and hold for 2 seconds to start searching the stations automatically. 6. MUTE BUTTON Press it to switch the sound off/on 7. MON button Press to select: STEREO or MONO. 8. BAND In radio mode press it to select desired band. 9. BAND In radio mode press it to select desired band. 10. Clock 11. Disc playback: Play/ Pause. Top play (press more than 2 seconds). 12. Disc playback: Intro play (10 seconds). Press this button to play the first 10 seconds or each track. Press this key again to clear this mode. 13. Disc playback: Track repeat play. Press this button to repeat the same track continuously. "RPT ON." will appear on the display. Press this key again to stop repeating. 14. Disc playback: Track random play. Press this button to play all the tracks in random order. "RDM ON" will appear on the display. Press this key again to stop random play. 15. Disc playback: MP3 track - 10 down. 16. Disc playback: MP3 track + 10 up. 17. F/PS button: automatic scan/Store. 18. Loudness. 11 19. MODE button Press it to select the mode: TUNER => DISC => AUX. 20. Power on: press any button on the panel except OPEN to turn on the unit. Press more than 2 seconds to power off. Inner panel Press the OPEN button on the front panel to flip it down. 1. LED INDICATOR 2. RESET BUTTON 3. DISK SLOT 4. EJECT BUTTON 12 Menu Function Press the POWER button to turn the unit on, the display will show a message . . to indicate it is ready to use. Press the BAND for the radio mode, press MODE to select between Aux, Radio mode and CD/MP3 play. Press the POWER button again to turn the unit off. VOLUME CONTROL A. The volume level can be adjusted at any time by rotating the audio level VOL knob as select mode has been initially defaulted at volume mode. BASS CONTROL A. Press the SEL button to select the bass mode until BAS appears on the display. B. Press the VOL knob to adjust the bass effect. TREBLE CONTROL A. Press the SEL button to select the treble mode un...