Assessments - 7, GPA: 4.1
(
)
)
|
Fotos e especificações Hyundai H-CDM8037 |
Facilidade de uso
Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK. - TA SEEK: when newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same station (PI - Program Information) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (60 seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information. - TA ALARM: during searching the radio does not retune but the double beep sound (alarm) is output. b. MASK DPI MODE Rotate the VOL knob to select the desired mode: MASK DPI or MASK ALL. - MASK DPI: masked only the AF which has different PI. - MASK ALL: masked the AF which has different PI and any other interfering non PI station which having the same transmitting frequency. c. RETUNE MODE To determine the initial time of automatic TA search. Rotate the VOL knob to select the desired mode: RETUNE L and RETUNE L. - RETUNE L: 90 seconds. - RETUNE S: 30 seconds. Note: Retune mode is active for TA SEEK mode only. d. AUDIO DSP MODE Rotate the VOL knob to select the desired equalizer mode: POPM => ROCK M => CLASS M => FLAT M => DSP OFF. e. LOUDNESS MODE Rotate the VOL knob to select the desired mode: ON or OFF. 13 f. ESP MODE (Electronic Shock Protection) Rotate the VOL knob to select the desired mode: ESP 12 or ESP 45. - ESP 12 second: for normal road condition. - ESP 45 second: for road condition extremely unusual. g. CD MULTI MODE Rotate the VOL knob to select the desired mode: ON or OFF. - CD MULTI ON: read multi section CD. - CD MULTI OFF: read the 1st section of CD only. h. BEEP MODE Rotate the VOL knob to select the desired mode: ON or OFF. - BEEP OFF: disable audible beep tone when any function is accessed. - BEEP ON: enable audible beep tone. i. SEEK MODE Rotate the VOL knob to select the desired mode: SEEK 1/ SEEK 2. - SEEK1: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size. Press and hold the Tuning up/ down button to seek the band in up or down direction and stop when a station is received. - SEEK2: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size. Press and hold the Tuning up/ down button increase or decrease the frequency rapidly until the button is released, the different between the same operation at Seek 1 mode is that this time the radio will not stop at any station. j. STEREO MODE Rotate the VOL knob to select the desired mode: STEREO or MONO reception for FM radio stations. You can sometimes improve reception of distant stations by selecting Mono mode. k. LOCAL MODE Rotate the VOL knob to select the desired mode: LOCAL or DISTANT (DX) tuning mode. Local mode improves reception in some areas where the signal is too strong. 14 Turning the sound off Press the MUTE button to turn the sound off. Press it again to turn the sound on. Mode setting Press the MD button repeatedly to select TUNER => DISC => USB/SD/MMC => AUX. Display status Press the DISP button to show the current mode information on the display. Digital tuner operations_ Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press the MD button to select TUNER. Press BAND once or more to select: FM1, FM2, FM3, FM4 (OIRT), AM1, AM2. Manual/ automatic tuning • Manual tuning: press the !«/►►! buttons shortly tune the stations manually down/up. • Automatic tuning: press and hold the !«/►►! buttons for 2 seconds to activate the automatic search. It will play when finds the station. 15 Programming tuner stations You can store up to a total of 36 radio stations in the memory (24 FM, 12 AM), manually or automatically. • To store a station: - Select a band (if needed) - Select a station - Hold a Preset button (1-6) you want store the station for at least 2 seconds. • To recall a station: - Select a band (if needed) - Press a Preset button (1-6) briefly to recall the stored station Auto memory store Select a band. Press A/PS button and hold for 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press it again. Preset scan Select a band. Press A/PS button to scan all preset stations in the memories of the current band and stay on each memory stations for 5 seconds. To stop preset scan, press the button again. Auto scan function In Radio mode press the SCN to start the automatic search and stay on each station for 5 seconds. TA (Traffic Announcement) function Press the TA button shortly to turn on or turn off the TA function. In TA mode (LCD shows TA) traffic program will ...