Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
1 Open the control panel. 2 Note on One-Touch Operation: When a cassette is already in the cassette compartment, pressing TAPE CD-CH turns on the unit and starts tape play automatically. Insert a cassette into the cassette compartment. The unit turns on and tape play starts automatically 3 Close the control panel by hand. 4 Select the tape direction. Each time you press 23, the tape direction alternates between forward (TAPE !i)} and reverse ( }. To stop play and eject the cassette Press 0. Tape play stops, the control panel flips down. The cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can also eject the cassette by pressing 0 while the unit is turned off. To fast-forward and rewind a tape Press and hold .A. for more than one second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side. Press and hold 1^2 ^ for more than one second to rewind the tape. When the tape reaches its end, playback of the same side starts. To stop fast-forward and rewind at any position on the tape, press 23. Tape play starts from that position on the tape. Notes: • When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) • When the tape reaches its end while fast-forwarding, the tape direction will be changed automatically. 18 Finding the beginning of a tune Multi Music Scan (MMS) allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune. During playback Specify the tune you want to locate (how many tunes ahead of or before the current tune). Press A. to locate a tune ahead of the current tune on the cassette. Press 'V to locate a tune before the current tune on the cassette. Tsnm \ MM L V .1. C*. MM J ' Tjr ] Ex.: When you locate three tunes ahead of the current tune Each time you press the buttons, the number changes up to ±9. When the beginning of the specified tune is located, playback starts automatically. Notes: • While locating a specified tune: - If the tape is rewound to its beginning, playback starts from the beginning of that side. - If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other side. • In the following cases, the Multi Music Scan function may not operate correctly: - Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions between tunes. - Tapes with short non-recorded sections. - Tapes with high level of noise or humming between tunes. - Tapes with tunes recorded at low recording levels. Other convenient tape functions Skipping the blank portions on the tape You can skip blank portions between the tunes (Blank Skip). When this function is turned on, the unit fastforwards (skipping blank portions of 15 seconds or more), to the next tune and starts playback. • See also “Changing the general settings (PSM)” on page 23. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 24.) 2 Press a. or v to select “B.SKIP” (blank skip). select “ON.” To cancel Blank Skip, repeat the same procedure and select “OFF” in step 3 by turning the control dial counterclockwise. 19 ENGLISH ENGLISH Playing the current tune repeatedly You can play the current tune repeatedly (Repeat Play). 1 Press M MODE to enter the functions mode while playing a tune you want to hear over again on a cassette. 2 Press RPT (repeat), while still in the functions mode, so that “REPEAT” appears on the display. I 131 TAPE 1 REPEAT RPT indicator When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again. To cancel Repeat Play, repeat steps 1 and 2 again so that the RPT indicator goes off. Note: In the following cases, Blank Skip and Repeat Play may not operate correctly: - Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes. - Tapes with short non-recorded sections. - Tapes with high level noise or humming between tunes. - Tapes with tunes recorded at low recording levels. Prohibiting cassette ejection You can prohibit cassette ejection and lock a cassette in the cassette compartment. While pressing TAPE CD-CH, press and hold /i/ATT for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the cassette is locked and cannot be ejected. I-r»-v LJ Kin r tr.r I mu Lull < To cancel the prohibition and unlock the cassette While pressing TAPE CD-CH, press and hold Este manual também é adequado para os modelos :
Unidade - KS-T707 (3.09 mb)