128-5315 CAUTION: FOLLOW THE CONNECTION SEQUENCE DESCRIBED BELOW TO ENSURE PROPER RECOGNITION OF THE CD CHANGER BY THE FACTORY RADIO. DO NOT FORCE CONNECTORS TOGETHER. LINE UP LOCATING TABS AND CAREFULLY MATE CONNECTORS. INSTALLATION INSTRUCTIONS FOR THE CDC-FDR: (Fig. 1) IMPORTANT : Vehicles with electronic heating/AC controls may experience intermittent operation of these controls when the CD Changer is disconnected. 1. Mount the CD changer at the desired location in the trunk following t

The AK-98-CDA may be required when rear mounting the CD Changer. 3. Route the CDC-FDF cable toward the factory radio. 4. Remove the factory radio from the dash panel using the factory removal tools. 5. Unplug both the power/speaker and CD Changer connectors from the rear of the radio. 6. Carefully connect the vehicle power/speaker and CD Changer connectors to the respective mating connectors on the CDC-FDF. 7. Carefully connect the power/speaker and CD Changer connectors of the CDC-FDF to t

128-5659 CAUTION: FOLLOW THE CONNECTION SEQUENCE DESCRIBED BELOW TO ENSURE PROPER RECOGNITION OF THE CD CHANGER BY THE FACTORY RADIO. DO NOT FORCE CONNECTORS TOGETHER. LINE UP LOCATING TABS AND CAREFULLY MATE CONNECTORS. NOTE: Only works with 6 Disc CD Changer. INSTALLATION INSTRUCTIONS FOR THE CDC-FDC: (Fig. 1) IMPORTANT : Installation must be done with vehicle and radio in OFF position. 1. Mount the Six Disc CD Changer at the desired location in the trunk following the installation instr

LINE UP LOCATING TABS AND CAREFULLY MATE CONNECTORS. INSTALLATION INSTRUCTIONS FOR THE CDC-TO2: (See Installation Diagram) 1. Mount the CD Changer in the rear of the vehicle. Refer to the installation instructions supplied with the CD Changer. 2. Be sure the ignition switch and the radio are in the off position. CAUTION: If not, the radio will not recognize the changer. 3. Remove the factory radio from the dash panel. 4. Disconnect the power/speaker harness between the car and the radio.

128-4729A RADIO PREPARATION: 1. Select two of the five mounting tabs provided and match the radio mounting style of the vehicle according to Figures 1 through 3 below. NOTE: Tab number is stamped on bottom of tab. 2. Attach the mounting tabs to the radio chassis with the two M4 X 5 screws provided. 3. Attach the 14-pin connector harness provided to the radio. FIG. 1 TAB #1 - I M4 SCREW -i TAB #2 - M4SCREW FIG. 2 TAB #3 M4SCREW -0» — TAB #2 - - M4 SCREW RADIO INSTALLATION: 1.

Installation Manual 1 pc. Owner's guide 1 pc. INSTALLATION PARTS ACCESSORIES MAIN UNIT 1 PACKING LIST Changer Mounting Angle Adjustment Tool 1 pc. Hex Head Bolt with Washer Base (M5 x 12) 4 pcs. 5 Meter Din Cable 1 pc. Screw Hole Cover Labels 1 pc. Mounting Bracket 2 pcs. Phillips Head Screw 4 pcs. 6 COMPACT ACC-30 DIGITAL AUDIO 6 DISC COMPACT DISC CHANGER BEFORE INSTALLING THE UNIT Transport Lock Screws The mechanism in the CD changer is "locked" into place during shipment by the 4 transport sc

The Random Play mode can be cancelled by pressing the button again for 2 seconds (RND indication will disappear from the display panel) or by activating the Track Intro-Scan (INT) or Repeat (RPT) function. co cococococo DISC EJECT ( ) BUTTON When pressed, disc play is stopped and the disc is automatically ejected; will disappear from the display panel and the unit will revert to radio operation. If the disc is not removed from the unit, it will automatically be reloaded within 10 seconds to prev

Similarly, with each momentary press of the Backward Track Select button ( -), the next lower track number will be selected. bs bsbsbsbsbsCUE/REVIEW FUNCTIONS High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue button (+ ) to advance rapidly in the forward direction or the Review button ( -) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on th

Note: Not all stations broadcast this data and RDS data is only possible under favorable reception conditions. To activate RDS, press the left button under the RDS option. The radio program type will be displayed for a few seconds. Station keys There are 18 storage positions for FM stations and 12 for AM stations. These keys also function as a direct CD selection when this radio is used with the optional CD changer. To program a station to a preset button, tune to the station and hold the preset

- FRI. SATURDAY 5:30AM - 4PM 6AM - 2PM 6:30AM - 5PM 7AM - 3PM 7:30AM - 6PM 8AM - 4PM 8:30AM - 7PM 9AM - 5PM ► INDEX ..............................................................................1 ................2 ..............3, 4 ............................................5 ....................................................6 ............................................7 ................................8 ....................................8, 9 10 10 10 10 11 12,13 14 14 ►