• Press LO to cancel Local mode and switch to DX (distance) mode. • The “ST” (stereo) indicator lights up when the tuned-in station is broadcasting in stereo and the reception is good. FUNCTION button Each time you press FUNCTION, the unit switches to one of the following modes, in cyclic order. * CD Play mode (available while a CD is in the unit) ** CD Changer Play mode (available while the optional CD changer is connected) PRESETTING STATIONS To preset stations automatically (Auto Memory) 1 P

This signal falls when the subcode are in standby stase. 51 SBCK I Subcode readout clock input. This is a Schmitt input. 52 FSX O Output pin for the 7.35 kHZ synchronization signal divided from the crystal oscillator. 53 WRQ O Subcode Q output standby output. 54 RWC I Read/write control input. This is a Schmitt input. 55 SQOUT O Subcode Q output. 56 COIN I Command input pin from control microprocessor. 57 CQCK I Input for both the command input acquisition clock and the SQOUT pin subcode

— Pressing DIR changes the unit to Tape Play mode. — Pressing CD changes the unit to CD Changer Play mode. If you switch modes with these buttons, the unit does not turn off at the turn-off time of the timer. Toswitchto CD/MD IN mode, press DIR, CD, or BAND before connecting a portable CD/MD player, etc. to the CD/MD IN jack. “rAPE PLAYBACK ,3 1 DIR 1 Press OPEN to open the front panel and insart a cassette. Playback starts in the direction that the unit played back previously. A (eject) button

2 Press A or V (for less than 0,5 seconds) to adjust the sound quality. To change the level rapidly, press and hold A or 7 down longer. A side V side Ifrft Increases the Decreases the v uf_ volume level. volume level. Increases the bass Decreases the bass %H5 level. level. Increases the treble Decreases the treble ~l?~ I level. level. Decreases the level Decreases the level WI of the left of the right L speaker(s). speaker(s). Decreases the level Decreases the level ~~~ of the front of the rear

9 ENGLISH To cancelthe timer To cancel program 1, press TUNE 7 or TUNE A repeatedly until the “PRG1 OFF indication flashes in step 2. To cancel program 2, press TUNE Y or TUNE A repeatedly until the “PRG2 OFF” indication flashes in step 4. Noles l When you preset two programs, be sure that they do not overlap. l Even if the unit is in a mode other than Radio mode, the unit switches to Radio mode and tunes in the preset radio program at the preset time automatically. When the program is over, the

Reset button MGL/5H16 SPECIFICATIONS RADIO SECTION (FM) Frequency Range: 87.5 MHz – 108 MHz (100-kHzsteps) 87.5 MHz – 108 MHz ~;k~t-feteps) Usable Sensitwlty 50 dB Quieting Sensitivity 17,2 dBf IF Rejection: 80 dB Frequency Response 30 Hz – 15,000 Hz S/N Ratio: 63 dB Stereo Separation: 35 dB at 1 kHz Alternate Channel Selectivity 70 db Capture Ratio 3 dB (AM) Frequency Range, 530 kHz – 1,710 kHz (1O-kHz steps) 531 kHz – 1,602 kHz (9-kHz steps) Usable Sensitivity 30 pV (30 dB) TAPESECTION Tape Sp

CAUTION Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product. TABLE OF CONTENTS PARTS AND CONTROLS .................................................................................................................. 3 DETACHING AND ATTACHING THE FRONT PANEL ...................................................................... 4 SETTING THE CLOCK ...........................................

When you carry the front panel out of your car, use the supplied carrying case. Before detaching the front panel, remove the disc to prevent possible damage to the unit. 1 Press PWR to turn the unit off. 2 While supporting the front panel with one hsnd, press A to release one side of the panel. Care must be taken not to drop the panel. It may suddenly eject at this point. 3 When the front panel is lifted from the unit, remove it by pulling away from the unit. Do NOT touch the connector on the re

............... . 7 MY INFORMATION SWITCH .......... ... ............... ........... ... ... .. ............ . ......8 TAPE PLAYBACK ........................................ ................................................................................ ...10 SOUND ADJUSTMENTS . . .11 CONNECTING A PORTABLE CD/MD PLAYER OR OTHER EQUIPMENT ....... .. ........ ........... .... 12 MAINTENANCE . ...................................................................................................... 13

Before you use the remote control, be sure to remove the insulating sheet by simply pulling it out. Remote control (back) Insulating sheet Replacing the battery 1 Insert the tip of a pointed object A into the hole B and pull out the battery holder to remove the lithium battery (CR2025). Remote control (back) Battery holder 2 Install a new lithium battery (CR2025) with the ) side facing up in the battery holder. 3 Push the battery holder into the unit until it clicks. CAUTION • Keep the lithium b