-___--, Tilt Angle / Front-Rear Position [TILT]-N Press and hold [TILT] on the display unit for more than 1 second. TILT/SLIDE —Ä^TTCT”] (Adjust) dSk Press [A] or [VI to adjust the tilt angle. Press [<] or [>] to [A] [V] move t0 the iron*or rear P°s't‘on' Monitor Position Setting Menu Tilt Angle Front-Rear Position [>] (Adjust) Position "REAR" and tilt angle "5" ■ cannot be selected at the same time. Notes: • Press [MODE] to return to the regular mode. • The monitor position setting menu is automatically closed if no operation is performed for about 60 seconds. • Vertical angle (TILT) and front-rear position data are saved in the memory, so when the display unit is drawn out next, it is automatically set at the angle and in the position adjusted before. • After adjusting its angle, also adjust the brightness to make it easy for you to watch. (^ page 32) • The display position can also be set on the main menu screen. {#■ page 24) Display Unit Lateral Angle Adjustment Hold the display unit by the non-siip part in the upper half of it, and adjust its lateral angle! Caution: There is the danger of your fingers being pinched if you hold the unit by lower part. Hold the unit by the upper half of it, and move it carefully without applying undue force. Folding Down the Display Temporarily Fold Down : Press [TILT] on the display unit. Raise: Press [TILT] again on the display unit. Note: Even when the unit is power off, you can fold down the display temporarily. ( Caution: Do not place any object on the display unit, or subject it to undue force.] CY-VMC7000U CD Player Mode Display Track Number Play Time Number of Track rMODEl The monitor shows 1 J “Over ►” when the number ot tracks is 21 or more. [<] [>] (TRACK) [—] (Eject) [<][>] (TRACK) Disc Insert Playback starts automatically. Notes : • Load a CO after making sure that there is no CD in the disc compartment. (If ’NO DISC" is displayed while the CD mode is activated, you will find there is no CD in the compartment.) • Loading a CD when the power is off will turn the power on. Disc Eject Press [±] to stop playback and eject the CD. When CD is in the player Press [MODE] to change to CD player mode and playback starts. Track Selection [»(TRACK) : Next track [<] (TRACK): Beginning of the current track Previous track (Press twice.) [MODE] Track Search Press and hold. [>] (TRACK) : Fast forward [<] (TRACK) : Fast backward Notes : .• You can play a CD even if the monitor is closed. • If you leave a CD at the CD slot for approximately 30 seconds, the CD is loaded into the compartment automatically after loud beep is energized three times. Cautions: • Do not use irregularly shaped CDs. • Do not insert foreign matter into the disc slots. 16 CY-VMC7000U Various Way of Listening (Only on the remote control) Random Play All the available tracks are played in a random sequence. ► Scan Play The first 10 seconds of each track plays in sequence. Repeat Play Repeat the current selection. Press [4] (RANDOM) RANQOM Press [4] (RANDOM) again to cancel. Press [5] (SCAN) SCAN With the scanning of all tracks over, the original program starts playing from the beginning. Press [5] (SCAN) again to cancel. Press [6] (REPEAT) Press [6] (REPEAT) again to cancel. CY-VMC7000U 17
)
