7. SYSTEM MENU Allow the user to access the system menu when the unit has been placed in TV mode ( See Item number 4 ) . Press cursor ( ) buttons to select desired picture control FMM screen mode, OSD language and source default during power up. 8. CURSOR ( ) Use these buttons to access menu selections on the screen. 7 9. ENTER Used to implement a selected setting or menu option. 10. DISPLAY Press to display the current disc information while the disc is playing. Press the cursor ( ) buttons

23 TROUBLESHOOTING PROBLEM SOLUTION IR remote inoperative Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Disc won't play Insert a disc with the label side facing up. Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. Play starts, but then stops immediately The disc is dirty. Clean it. Conden

Before operating, take a few minutes to review the safety and operating instructions in this manual so you can quickly and safely become familiar with your NavMate software’s many features. This User Manual explains the NavMate software’s functions, and provides details on • Using the control buttons • Entering destinations • Understanding the different screens available on your NavMate software • Adjusting user preferences • Updating software NOTE: All users should read this manual prior to ope

* This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback cannot be guaranteed. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Insert the disc with the label facing the vehicle’s headliner. Note: the following Discs CANNOT be used with this player : • MiniDisc • Laserdisc • CD-1, CD-ROM, DVD-ROM, Super Audio CD (SACD), DVD Audio, JPEG To load and Play a Disc Press t

Step 3 : Press the icon to access the navigation main menu screen. Step 4 -- Select Destination You have many ways to select a destination. For this example, let’s find a nearby Airport. Select by touching screen: • Icon to activate main menu. • Start Route Guidance • Point of Interest • State/Province NOTE: The software remembers the last State/Province, so this step is not necessary every time. • By Category • Airport • Sort by Distance • Select one of these functions and the system will calcu

The user can either select English, Spanish, French or German for the OSD language. SYSTEM MENU OSD LANGUAGE ENGLISH FMM PICTURE CONTROL SPANISH OSD LANGUAGE FRENCH SOURCE DEFAULT DVD GERMAN SCREEN MODE 12 SOURCE DEFAULT DVD This allows the user to set the system default source to DVD. Note: • If source default is set to ON, every time the unit is turned off then on, the unit will power up and automatically switch the source to DVD. If source default is set to OFF and the unit is turned off then

You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle. Audiovox Electronics Corporation cannot accept any responsibility whatsoever for accidents resulting from failure to observe these precautions or safety instructions. 1

Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants. If you have any questions regarding wire routing in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074. When connecting power and ground in a