Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
4. Connect the speaker wires. 5. Connect the power wire, power control wire and grounding wire following this order. 6. Install the unit in the car. 7. Connect the negative -terminal of the battery. 2WARNING To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal. 2CAUTION • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. • Check that no unconnected cables or connectors are touching the car body. Do not remove caps from unconnected cables or connectors to prevent short circuits. • Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. ¦ Speaker level input terminals (!) • The genuine-accessory car stereo shall have a maximum power output of no more than 40 W. • Do not connect the speaker output leads from a power amplifier (Optional) to the speaker level input terminals of this unit, for this may cause malfunction or damage. • Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage. • Connect the power control lead to a power supply which can be turned ON/OFF by the ignition key switch (ACC line). With this connection, shock noise may be generated when the power of the genuine-accessory car stereo is switched ON/OFF. ¦ Power terminal (234) Connect to their respective terminals the power supply wire, and ground wire, all of which pass through the associated terminal cover. Once the connections are complete, place the cover on the terminal section. ¦ Accessories Part name External View Number of Items Terminal cover (Power terminal) 1 Self-tapping screws (o4 . 16 mm) 4 Installation Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’s seat without any hindrances. As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered. 2CAUTION • Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be damaged. • Install this unit in a location which allows heat to easily dissipate. Once installed, do not place any object on top of the unit. • The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it. • When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe, or wiring harness, and be careful not to cause scratches or other damage. • Do not install near the dashboard, rear tray, or air bag safety parts. • The installation to the vehicle should securely fasten the unit to a place in which it will not obstruct driving. If the unit comes off due to a shock and hits a person or safety part, it may cause injury or an accident. • After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally. Self-tapping screw (o4 . 16 mm) Installation board, etc. (thickness : 15 mm or more) System examples L R L R L R L R L R L R L R STEREO MONO(Lch) OPERATION STEREO MONO(Lch) L+R OPERATION KAC-829/729S/529S KAC-629S LPF FILTER OFF LPF FILTER HPF OFF L R L R STEREO MONO(Lch) OPERATION STEREO MONO(Lch) L+R OPERATION KAC-829/729S/529S KAC-629S LPF FILTER OFF LPF FILTER HPF OFF STEREO MONO(Lch) OPERATION STEREO MONO(Lch) L+R OPERATION KAC-829/729S/529S KAC-629S LPF FILTER OFF LPF FILTER HPF OFF 7 8 7 8 7 8 7 8 7 8 7 8 POWER IN BATT. P.CON(REMOTE) GND LEFT BRIDGED RIGHT SPEAKER OUTPUT POWER AMPLIFIER 234 Operations of the following control and switches are required in accordance with the center unit and speakers connected with this unit. 1Fuse 40 A . 1 : KAC-829/729S 25 A . 1 : KAC-629S 15 A . 1 : KAC-529S If you can’t find the specified capacity fuse at your store etc., consult your Kenwood dealer. 2Battery terminal 3Ground terminal 4Power control (REMOTE) terminal 5SPEAKER OUTPUT terminals • Stereo Connections: When you wish to use the unit as a stereo amplifier, stereo connections are used. • Bridged Connections: When you wish to use the unit as a high-output monaural amplifier, bridged connections are used. (Make connections to the LEFT channel (+) and the RIGHT channel (–) SPEAKER OUTPUT terminals.) 6RCA cable ground lead terminal When using an RCA cable with a ground lead attached, connect the ground lead to this ter...
Este manual também é adequado para os modelos :Avtousiliteli - KAC-629S (251.49 kb)
Avtousiliteli - KAC-729S (251.49 kb)
Avtousiliteli - KAC-829 (251.49 kb)