Assessments - 3, GPA: 4.3 ( )

Fabricante : Jacuzzi Arquivo Tamanho: 5.29 mb Arquivo Nome : Língua de Ensino:

11.2 economy Filtration/heating Modes (F4-F6) Economy filtration/heating modes are typically selected by customers in warm climates where heat up times are minimized due to higher ambient temperatures. In these modes, the water temperature is regulated by the set temperature, 24-hour circulation pump, and heater only while a programmed filter cycle is running (unless in summer logic; see Section 14.1, page 38). 11.3 lock modes (l1-l2) These modes are designed for use during spa service or to prevent unauthorized use. 11.4 selecting the Filtration/heating Mode Press and hold both control panel WARMER ( ) and COOLER ( ) buttons at the same time, then release. Then press either WARMER ( ) or COOLER ( ) button to select filtration/heating mode F0-F6 or lock modes L1-L2 below: J-300 J-300 F0 5 minutes of filtration per day (one 5 minute “Blow-Out” cycle every 24 hours to purge all plumbing lines) F1 1 hour of filtration per day (one 30-minute cycle every 12 hours); This is the factory default setting. F2 1.5 hours of filtration per day (one 30-minute cycle every 8 hours) F3 2 hours of filtration per day (one 30-minute cycle every 6 hours) economy Filtration/heating Modes F4 1 hour of filtration/heating per day (one 30-minute cycle every twelve hours) F5 1.5 hours of filtration/heating per day (one 30-minute cycle every eight hours) F6 2 hours of filtration/heating per day (one 30-minute cycle every six hours) lock modes l1 Lock Out: disables all spa functions to permit filter cleaning. l2 Lock Mode: disables the jets to prevent unauthorized use of spa. Filtration/heating cycle will continue to operate as programmed in this mode. The temperature display flashes when this function is enabled. Example: The “F3” filtration/heating cycle was enabled prior to choosing lock mode. The spa continues to perform the “F3” cycle until lock mode is canceled, allowing another cycle to be selected. To set a time for the first filtration/heating cycle, simply turn power on to the spa two minutes prior to the desired time. Example: If you desire your first filtration/heating cycle to begin at 10:00 AM turn off power to the spa and turn it back on again at 9:58 AM. note: Start time is approximate and may vary slightly from day to day. 12.0 spa maintenance Proper and regular maintenance of your spa will help it retain its beauty and performance. Your authorized Jacuzzi dealer can supply you with all the information, supplies, and accessory products you will need to accomplish this. DanGer: rIsK oF severe InJurY or DrownInG BY enTrapmenT! • Keep hair, loose articles of clothing or hanging jewelry away from suction fittings, rotating jets or other moving components to avoid entrapment that could lead to drowning or severe injury. • Never use the spa unless all suction guards, filter, filter lid, or skimmer assembly are installed to prevent body and/or hair entrapment. • Never operate or use the spa if the filter, filter lid, or skimmer asse...

Baixe o seu

Para fazer o download, introduza 2 dígitos :