Assessments - 4, GPA: 4.3
(
)
)
|
Fotos e especificações Philips SHB1400 |
Facilidade de uso
It features Bluetooth verson 2.1+EDR but will also work with devices featuring other Bluetooth versions that support the Headset (HSP) or Handsfree (HFP) Bluetooth profile. English EN 5 4 Overview of the headset abcdef a Ear cap b VOL -/VOL +: Volume button c LED d : Function button e Mic f USB cap 6 EN 5 Get started Charge the headset Note • Finish your call before charging the headset, as connecting the headset for charging will power off the unit. • During charging, you can operate the headset normally. 1 Remove the USB cap. 2 Plug the headset into a powered USB port on a PC or into a power adaptor with USB outlet. » During charging, the LED turns red.The LED turns off when the headset is fully charged. Tip • Typically, a full charge takes 2 hours. Pair the headset with your mobile phone Before you use the headset with a mobile phone for the first time, pair it with the mobile phone.A successful pairing establishes a unique encrypted link between the headset and the mobile phone. The headset stores the last eight links in the memory. If you try to pair more than eight devices, the link for the earliest paired device is overwritten. 1 Ensure that the headset is charged and turned off. 2 Ensure that the mobile phone is turned on and its Bluetooth feature is activated. 3 Press until the LED starts flashing red and blue alternately. Do not stop pressing the button after seeing the blue LED only. » The headset is in pairing mode, which lasts five minutes. 4 Pair the headset with the mobile phone. For details, refer to the user manual of the mobile phone. A sample pairing is shown below. 1 Under Bluetooth menu on the mobile phone, search for the headset. 2 From the found devices, select Philips SHB1400. • Enter “ 0000” (4 zeros), if prompted to enter the pin code of the headset. On mobile phones using Bluetooth 2.1+EDR or higher, you may not need to enter a pass code. Settings Connectivity Select Back Enter Password Settings Devices Found Select Back Philips SHB1400 Settings Connectivity Bluetooth Select Back Add Bluetooth device » When the pairing is successful, a long beep occurs and the LED on the headset starts to flash blue every 3 seconds. English EN 7 6 Fit your headset 1 Place the earbud in your ear and rotate the headset upwards or downwards until it fits your ear securely. Optional (with an earhook) For an extra-secure fit, you can attach the earhook: Push the ball joint between the earbud and the main body of the headset.Adjust the earhook for providing the best fit. 8 EN 7 Use the headset Manage 3-way calls English Connect the headset to a mobile phone 1 With the mobile phone turned on, press until the LED lights up, to turn on the headset. » Once turned on, the headset reconnects automatically to the last device it was connected to. » If the last connected device is not available, the headset tries to reconnect to the second to last device that was connected to the headset. If it cannot find this device, it will look for all previously paired devices in the order of last usage, until it finds a device to connect to.The headset stores up to 8 previously paired devices. If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from your mobile phone’s Bluetooth menu. Automatic power saving If the headset cannot find any Bluetooth device to connect to in range within five minutes, it automatically powers down to save battery life. Control your calls Turn the headset on/off Press until the LED turns on/off. Check battery Hold VOL + and VOL -simultaneously. > 50%: 1 blue flash < 50%: 2 red flashes < 25%: 3 red flashes Pick up/end a call Press . Adjust Volume Press VOL +/VOL -. Redial the last number Press twice quickly. Reject a call Hold . Activate voice dialing Hold until beep occurs. Transfer a call to a mobile phone Hold during a call. Mute the Mic Press twice quickly during a call. If your mobile phone and network operator support 3-way-calls, you can manage 3-way-calls via the headset. To hold the active call and accept a waiting call Press while the 2nd call is coming in. To drop the active call and accept a waiting call Hold while the 2nd call is coming in. To swap the active call and the call on hold Press during a call. To drop the active call and accept the call on hold Hold until a beep sound occurs. To drop the call on hold Press and VOL - until a beep sound occurs. To add the call on hold to an active call Press and VOL + until a beep sound occurs. LED and sound indication The red/blue LED flashes alternately. The headset is ready for pairing. The blue LED flashes once every 3 The headset is connected seconds. to the phone. The red LED flashes twice every 5 seconds. The headset is not connected. The blue LED flashes once every half There is an incoming/ a second. outgoing call. The blue LED flashes once every second. The headset is active on a call. The red LED flashes three times and The battery is low in beeps twice every minute. power. S...
Este manual também é adequado para os modelos :fones de ouvido sem fio e outros acessórios - SHB1400/00 (1.73 mb)