Um die Gefahr eines elektrischen Schocks zu reduzieren, sollten Sie die Abdeckung (oder Ruckseite) keinesfalls entfernen. Im Inneren des Gerats befinden sich keine Teile, die vom Benutzer selbst gewartet werden konnen. Uberlassen Sie die Wartung qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung von Bedienelementen und der Durchfuhrung von Prozeduren unbedingt die Anweisungen dieses Handbuchs, da andernfalls gefahrliche Strahlung freigesetzt werden kann. WARNUNG: Setzen Sie da

2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the USB power cable. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the drive and install the software. • Please do not connect the USB cables by any means other than specified above. Using the wrong type of

• Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. 1Connect the USB 2.0 (Y type) cable to the drive. 2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achiev

DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are recommended. DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended. DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended. System requirements Hard disk Video Memory Interface CD-ROM drive Software Required OS CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD±R DL discs CPU Memory Item Quantity - Portable Super Multi Drive 1 - USB 2.0 cable (Y type) 1 - Software Installation disc 1 - Quick Guide for Drive 1 Quick Set-up Guide Port

• Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. 1Connect the USB 2.0 (Y type) cable to the drive. 2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achiev

• Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. 1Connect the USB 2.0 (Y type) cable to the drive. 2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achiev

* For Windows 7, Windows Vista, 1GB of RAM or large is recommended. * Compatibility problem in write/read function may occur with some media depending on the media manufacturing quality. * To achieve maximum Record & Write speed your system may require data to be copied first to the computer’s hard drive rather than directly from another source disc or drive. Pentium IV 2.4GHz or Higher(with USB 2.0) for basic performance (Recommended for optmal performance: Pentium IV 3.2GHz or Higher). 256MB o

1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or duri

The removing procedure varies depending on your OS. Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • PC USB powered, no AC adapter needed. • Supports LightScribe Direct Label Printing Technology - *Optional. System meeting the following r