MODELIGHT WATER 165 RESIST 9:000045Arm ron 30 All-SPORT MO2-I4l l l l l l l l l l l l SETADJ. MODELIGHT WATER 165 RESIST Armitr INSTALITE 9:0000CHIME ALM2 45TIMER ALM1 15 8 L CH NO SETTING THE TIME AND CALENDAR ACTIVATING THE ALARM AND HOURLY CHIME A B CA C Analog 1. While in Alarm Mode, press ‘C’ to select ALARM 1, 1. Pull the Crown, ‘E’, out. The ALARM 2 and/or HOURLY CHIME. MO2-I4l l l l l l l l l l l l SETADJ. MODELIGHT 9:0000 E E ‘ALM1’ or the symbol on the right side of the display, depend

SETTING ALARMS 1 & 2 the water resistant seal – voiding your warranty. 2. Press ‘A’ to return to Time Telling Mode. 1. From Time Telling Mode, press ‘B’ four times for It is important to recycle your watch battery in an Alarm 1 Mode or five times for Alarm 2 Mode. environmentally safe way. Watch batteries contain very small amounts of mercury, which is required to prevent NOTE: Both Alarm 1 and Alarm 2 can be set. When Alarm corrosion of the battery and damage to your watch. There is activated,

Press ‘B’ advance the Minutes. 4. Press ‘B’ advance the Month. 5. Press ‘B’ the Date. 6. Press ‘B’ advance the Day of the Week. 7. Press ‘A’ to end set sequence and return to Time Telling Mode. . Minutes flash. Press ‘C’ to • Water Resistant as indicated on the watch • INSTALITE – Electro Luminescent Display with three seconds automatic light up SELECTING FEATURES Timer Mode. 2. Press ‘A’. Hours flash. Press ‘C’ to advance Hours. 3. Press ‘B’. Minutes flash. Press ‘C’ to advance Minutes. 4. Pres

Replace with one (1) CR2025 or equivalent only. 1. Press ‘D’ in any mode to illuminate the watch face. accumulate time at a particular interval, while the internal NOTE: Excessive use of backlight will shorten battery life. stopwatch continues to accumulate total time. This watch contains precise electronic components and WATER RESISTANCE This is a WATER RESISTANT watch. Do not operate the push buttons below the surface of the water. Should water time for a particular interval, then resets to ze

From Time Telling Mode, press ‘B’ once to enter the Beep Beep’) will sound for ten seconds or until any Chronograph Mode. button is pressed. If no button is pressed during the ten 2. Press ‘C’ to start timing. second interval, the Timer will count up for five minutes. 3. Press ‘C’ again to stop timing. Press ‘C’ to stop the ‘Count up Timer.’ Press ‘C’ again 4. Press ‘A’ to reset to zero. to resume ‘Count up Timer.’ SPLIT OR LAP TIME 9. Press ‘C’ to stop Timer. Press ‘B’ to return to Time 1. Pres

Should water time for a particular interval, then resets to zero to measure the discrete time of the next interval. 1. In either SPLIT or LAP Chronograph, press ‘C’ to start How-ever, it is not necessary to return your watch to the manufacturer for battery replacement. It is recommended that you bring your timepiece to a local watch repair or condensation appear in the watch, immediately have timing. facility. the watch checked. Water can corrode electronic parts 2. Press ‘D’ to measure splits o

2. Press ‘A’ to measure Laps. 3. Press ‘C’ to stop timing at the end of the event. 4. Press ‘A’ to reveal the final Lap time. 5. Press ‘A’ again to reset to zero. 6. Press ‘B’ to return to Time Telling Mode. SETTING 24 HOUR ALARM 1. From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode. 2. Press ‘A’. Alarm Hours flash. Press ‘C’ to advance the Alarm Hour. 3. Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute. 4. Press ‘B’. Alarm Time Zone flashes. Press ‘C’ to select

• INSTALITE – Electro Luminescent Display SELECTING FEATURES 1. Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of the Week. 2. From Time Telling Mode, press ‘B’ once. Chronograph Mode appears. Press ‘B’ four times to return to Time Telling Mode. 3. From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ three times to return to Time Telling Mode. 4. From Time Telling Mode, press ‘B’ three times. Timer Mode appears. Press ‘B’ twice to return to Time Telling Mode.

They have the specialized tools and experience to do the job right. Inexperienced people can scar the case and damage the water resistant seal – voiding your warranty. It is important to recycle your watch battery in an environmentally safe way. Watch batteries contain very small amounts of mercury, which is required to prevent corrosion of the battery and damage to your watch. There is no danger to you or your watch from the mercury because it is in the sealed battery. But you need to recycle y

2. Press ‘C’ to start timing. 3. Press ‘C’ again to stop timing. 4. Press ‘A’ to reset to zero. 5. Press ‘B’ to return to Time Telling Mode. SPLIT (LAP) OPERATION 1. While in the Chronograph Mode, press ‘C’ to start timing. 2. Press ‘A’ to measure Splits (or Laps). 3. Press ‘C’ to stop timing at the end of the event. 4. Press ‘A’ to reveal the final Split (or Lap) time. 5. Press ‘A’ again to reset to zero. 6. Press ‘B’ to return to Time Telling Mode. SETTING THE ALARM 1. From Time Telling Mode,