Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
21 D Notes • Do not disconnect the Voice Tracer while files are transferred from or to the device. Data is still being transferred while the record/play indicator light 18 is blinking in orange. • Do not format the drive of the Voice Tracer on a computer. 4.8 Using speech recognition software Recordings can be transferred to a computer and converted to text using speech recogntion software, such as Dragon NaturallySpeaking. See the user manual for the speech recognition software for more information. For optimal recogntion accuracy, it is recommended to set the Digital Voice Tracer to SHQ recording mode and the recording sensitivity to LO (low). See chapter 8 for more information. 5 Record 5.1 Record with the built-in microphone 1 Press the INDEX / a button while the recorder is stopped to select the desired folder 22 . 2 Press the g button to start recording. The record/play indicator 18 lights red. Point the built-in microphone 3 toward the sound source. 3 To pause recording, press the g button. The record/play indicator will blink, and PAUSE will flash on the display 23 . Press the g button again to resume recording. 4 To stop recording, press the j / DEL button. D Notes • Set the desired voice activation function and recording mode before starting recording (see chapter 8 for more information). • Make a test recording to make sure that the Voice Tracer settings are correct. • Press and hold f during recording to display the remaining recording time. • Press b during recording to create a new file. • The maximum number of files in each folder is 99, for a total capacity of 396 files (99 files x 4 folders). • If the recording time exceeds the available capacity or the number of files reaches 396, recording stops and ‘FULL’ will be displayed. Delete a few recordings or move them to a computer. • Do not remove the batteries during recording. This may cause the recorder to malfunction. • If recording for a prolonged period of time, replace the batteries before beginning. 5.2 Record with an external microphone To record with an external microphone, connect the microphone to the microphone socket and follow the same procedure as for the built-in microphone. The internal microphone is switched off when an external microphone is connected. 24 5.3 Add index marks Index marks can be used to mark certain points in a recording as points of reference. 1 Press the INDEX / a button during recording to add an index mark. The index number is displayed for one second 25 . D Notes • The icon indicates that the recording contains index marks. • Up to 32 index marks can be set per file. 6 Playback 1 Press the INDEX / a button while the recorder is stopped to select the desired folder. 2 Press the h or b button to select the file to play back. 3 Press the f button. The playback time will be shown on the display, and the green LED 18 will light. 4 Adjust the volume using the + and – buttons. 5 To stop playback, press the j / DEL button. The total playback time of the current file will be shown on the display. 6 Press the f button again to continue playback from the previous position. D Notes • When headphones are connected to the EAR jack 1 , the recorder speaker will be switched off. D Notes on using the Voice Tracer as a music player • The recorder supports music files in .wma and .mp3 formats that can be transferred from the computer to the music folder of the recorder. Files with copy protection (digital rights management) are not supported. • The Voice Tracer supports up to two folder levels within the music folder. Each folder can hold up to 199 entries (files and folders). • Press the f button to open a selected folder/file. Press the INDEX / a button to return to the folder one level higher. • Press the g button during music playback to change the equalizer mode (Normal > Classic > Jazz > Rock > Pop > Normal). 6.1 Playback functions 6.1.1 Slow, fast, normal playback Press and hold the f button for 1 second or longer to switch between normal, slow and fast playback. 26 6.1.2 Search Press and hold the h or b button during playback to scan backward or forward in the current file at a fast speed. Release the button to resume playback at the selected speed. 6.1.3 Rewinding and forwarding Press the h or b button during playback to rewind to the beginning of the file being played or forward to the next file, respectively. If the file contains index marks, playback begins at that point. 6.2 Play features You can set the Voice Tracer to play files repeatedly or randomly. 6.2.1 Repeat a sequence 1 To repeat or loop a sequence in a song, press the INDEX / a button at the chosen starting point. REP. A – B flashes on the screen 27 . 2 Press the INDEX / a button again at the chosen end point. The repeat sequence begins. 3 Press the j / DEL button to stop playback or press the INDEX / a button to return to normal playback. 6.2.2 Repeat a file or folder / shuffle mode 1 Press and hold the INDEX / a button for 1 second or longer during...
Este manual também é adequado para os modelos :Ditado - LFH0667/00 (1.81 mb)
Ditado - LFH0662/00 (1.81 mb)