Log:
Assessments - 3, GPA: 4.7 ( )

Instruções de Operação Aiwa, Modelo CSD-TD59

Fabricante : Aiwa
Arquivo Tamanho: 876.65 kb
Arquivo Nome :
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


H . D) – 306 . 155 . 253 mm (121/8 . 61/8 . 10 in.) / Weight (excluding batteries) – 2.5 kg (5 lbs. 8 oz.) / Accessories – Remote control (1, CSD-TD59 only), AC cord (1) Specifications and external appearance are subject to change without notice. COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. If an erroneous display or malfunction occurs Turn off the unit and press POWER 6STANDBY/ON while pressing s. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 5 RADIO OPERATIONA 1 Press RADIO BAND* repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected, CSD-TD59 only) 2 Press f, g(TUNING -, +) to select a station. During FM stereo reception, is displayed. After listening, press POWER 6STANDBY/ON to turn the power off. For better reception FM AM Extend the rod antenna The antenna is inside the and orient it for the best unit. Position the unit for reception. the best reception. For quick tuning (Auto Search) Keep f, gpressed until the tuner starts searching for a station. When a station is tuned to, the search stops. If the broadcast signal is weak, it does not stop. To stop the search manually, press for g. REPEAT/MODE/SLEEP* -If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. -If a high-pitched sound is heard during AM recording, press the button repeatedly to display “b1” or “b2”, so as to eliminate the noise. * or MODE on the remote control (CSD-TD59 only) To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 1 Press RADIO BAND. 2 Press POWER 6STANDBY/ON while pressing RADIO BAND. When the AM tuning interval is changed, the preset stations are cleared. NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit. To listen with the headphones Connect headphones with a stereo mini plug to the \PHONES jack on the rear of the unit. 6 ENGLISH (CSD-TD59 only) (CSD-TD59 only) PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press s STOP/SET/CLEAR* once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number Frequency * or sSTOP on the remote control (CSD-TD59 only) 3 Repeat steps 1 and 2. The next station will not be stored if a total of 15 preset stations have already been stored for a band. To listen to preset stations Select a band then press PRESET or ePLAY/ PAUSE repeatedly. To select a preset number directly with the remote control (CSD-TD59 only) Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. Within 4 seconds, hold down suntil “M” and the preset number disappear. The higher numbers in the band are decreased by one. SOUND ADJUSTMENT Volume or tone adjustment does not affect recording. VOLUME (VOL, CSD-TD59 only) Press VOLUME Nor Mon the unit or VOL ior kon the remote control. The volume level is displayed as a number from 0 to 25. • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. • Pressing DISPLAY on the remote control displays the adjusted volume level (CSD-TD59 only). 3-MODE EQ* (equalizer) Press 3-MODE EQ repeatedly until the desired mode is displayed. The equalizer mode changes to R (Rock), P (Pop), J (Jazz) or no equalization, cyclically. Rock - Emphasizes the high and low range of music. Pop - Emphasizes voice and midrange of music. Jazz - Emphasizes the low range of music. * or EQ on the remote control (CSD-TD59 only) T-BASS system The T-BASS system enhances the realism of low- frequency sound. Press T-BASS to turn it on or off. ENGLISH 7 CD OPERATIONB 1 Press CD. The power is turned on. 2 Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. PUSH OPEN Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc. 3 Press ePLAY/PAUSE to start play. The number of the track being played and elapsed playing time are displayed. sSTOP/SET/CLEAR* – Stops play. * or sSTOP on the remote control (CSD-TD59 only) ePLAY/PAUSE – Pauses play. To resume play, press again. f, g– Searches for a particular point during playback. Hold down for gand then release it. – ...

Este manual também é adequado para os modelos :
Ditado - CSD-TD55 (876.65 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias