Assessments - 4, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Or charge the rechargeable battery or replace the old rechargeable battery with a new one. MEMORY FULL . The remaining memory capacity of the IC recorder is insufficient. Erase some messages before recording. FILE FULL . When there are already 99 messages in the selected folder or the total number of the file stored in the IC recorder becomes maximum, you cannot record a new message. Erase some messages before recording a message. FILE DAMAGED . You cannot play or edit messages, because the data of the selected file is damaged. FORMAT ERROR . The IC recorder cannot be turned on using the computer because there is no copy of the control file required for operation. Format the IC recorder using the formatting function in the menu. PROCESS ERROR . The IC recorder failed in memory access. Remove and then re-insert the battery. . Save a backup copy of your data and format the IC recorder using the menu. GB Error message Cause/Remedy SET DATE&TIME . Set the clock; otherwise, you cannot set the alarm. NO FILE . The selected folder does not have any messages. You cannot move a message or set the alarm, etc., because of this. PAST DATE/TIME . You set the alarm when the time has already passed. Check it and set the appropriate date and time. FILE PROTECTED . The selected message is protected and is now a “Reading only” file. You cannot erase it. Cancel “Reading only” on your computer to edit the message using the IC recorder. UNKNOWN DATA . The data does not have a file format which the IC recorder supports. CANNOT OPERATE . You cannot move a message, because there is more than one folder that has files with same name. Change the file names. . A message in the folder cannot be moved. CHANGE FOLDER . If there are no MP3 files in the folder, no folders are displayed in the display window, therefore, the folder setting will be changed. SYSTEM ERROR . A system error other than the above has occurred. Remove the battery and re-insert it. Troubleshooting GB System limitations There are some system limitations of the IC recorder. Troubles as mentioned below are not malfunctions of the IC recorder. Symptom Cause/Remedy You cannot record messages up to the maximum recording time. . If you record messages in a mixture of ST, STSP, STLP, SP and LP modes, the recordable time varies from the maximum ST mode recording time to the maximum LP mode recording time. . The sum of the number on the counter (elapsed recording time) and the remaining recording time may be less than the IC recorder’s maximum recording time. You cannot display MP3 . If you have transferred MP3 files using your computer, those files in order. files may not be copied in order of transfer because of the System limitation. You cannot enter lower-. Depending on the combination of the characters used for case characters. the folder name that was made on your computer, those characters may change to all capitals. You cannot specify the . You cannot specify the finishing point B before the starting finishing point B. point A that has been set. GB Additional Information * Optional audio connecting cables (not supplied) Recording with Other To the IC To the other recorder equipment Equipment RK-G139 HG Stereo Mini-plug mini-plug (monaural) (without (without resistor) resistor) RK-G136 HG Stereo Stereo mini-plug mini-plug (without (without resistor) resistor) .Note Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. Tape recorder, etc. To .(headphone) jack To audio input connector To record the sound of the IC recorder with other equipment, connect the . (headphone) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment using an audio connecting cable*. Additional Information GB Using a USB AC Adaptor (not supplied) USB connector of the IC recorder USB AC adaptor (not supplied) You can charge the rechargeable battery by connecting the IC recorder to an AC outlet using a USB AC adaptor AC-U50A/ AC-U50AD (not supplied). You can charge the battery while you are using the IC recorder, so that it is useful when you want to record for a long time. .Note Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. 1 Remove the USB cap from the IC recorder and connect the IC recorder to a USB AC adaptor (not supplied) . 2 Connect the USB AC adaptor to an AC outlet. Now you can use the IC recorder while changing the battery. While the battery is charging, the remaining battery/charging indicator are displayed in an animation. When the remaining battery/charging indicator indicates “ ,” charging is completed. (Charging time: approx. 8 hours*) When you use the IC recorder for the first time, or after you have not used the IC recorder for a certain time, it is recommended that you charge the battery repeatedly until “ ” is displayed. If the remaining battery/charging indicator is not displayed, charging has not been ...
Este manual também é adequado para os modelos :Ditado - ICD-UX70 (1.69 mb)
Ditado - ICD-UX80 (1.69 mb)