Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Black finish or stainless with black door. Large easy-to-fill translucent hoppers hold 4 lbs. (1.81 kg) of product each, ensuring quick and timely refilling. High speed heavy-duty whipper for complete product mixing. Improved automatic rinsing of whipper reduces run-on after beverage is dispensed. Adjustable legs and drip tray accommodate 20 oz. (.59 litre) mugs easily. Electrical and plumbing components easily accessible through front and top. International electrical configurations available. :MD DBC Dispenser Easy-to-program, one-touch portion control for 3 cup sizes. Fast fill perfect for quick service restaurants. Each mixing chamber has independent powder to water ratio. System setup is password protected for safety. Simple setup and hopper throw calibration system. Model FMD DBC-3 Dimensions: 30”H x 11.3”W x 23.3”D (76.2 cm Hx28.7 cm Wx 59.2 cm D) Model FMD-3 available with optional Cafe Display For current specification sheets and other information, ao to Model Agency Listing FMD-3 (B£) .®. FMDS-3 FMD DBC-3 7/10 D4 Dimensions & Specifications Model Product # Volts Amps Tank Heater Watts Total Watts Capacity Cu. Ft. Shipping Weight Cord Attached FMD-3 BLK SET00.0197 120 15 1700 1800 5.2 gal./hr.** 8.1 ft3 86 lbs. Yes* FMD-3 BLK SET00.0332 120 15 1700 1800 5.2 gal./hr.** 8.1 ft3 86 lbs. Yes* FMD-3 SS SET00.0198 120 15 1700 1800 5.2 gal./hr.** 8.1 ft3 86 lbs. Yes* FMDS-3 BLK 28600.0000 120 15 1700 1800 5.2 gal./hr.** 8.1 ft3 84 lbs. Yes* FMD DBC-3 BLK 29250.0000 120 15 1700 1800 5.2 gal./hr.** 8.1 ft3 85 lbs. Yes* fModel has soup dispense tips and graphic. *Power cord (NEMA 5-15P) 15 Amp-120V machine only. **Based on incoming water temperature of 60°F. fCafe display. Door Conversion Kit—From model HC (black decor only) to model FMD door - 28613.0000 Note: SS=stainless steel cabinet with black door, BLK=black decor. Electrical: 120V model requires 2-wires plus ground service rated 120V, single phase, 60 hz. 120/240V model requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60Hz. Plumbing: 20-90 psi (138-621 kPa) from a %" or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with W male flare fitting. 43 Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. All dimensions shown in inches. 7/10 © Bunn-O-Matic Corporation...