Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Adjusting the Temperature To accurately check the temperature, insert a reliable thermometer into a plastic (non-breakable) bottle, partially filled with water. Tighten the bottle cap securely. Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. Press and release the (+) or (–) indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch and release. Adjust the temperature by touching and releasing the key. After three (3) seconds of inactivity, the display will beep to accept the new temperature. Factors that affect the internal temperatures of the cabinet include: 1 Temperature setting. 2 Room temperature where installed. 3 Number of times the door is opened and closed. 4 Amount of time the internal light is illuminated. This affects primarily wines/beverages on the top racks/shelves. 5 Installation in direct sunlight or near a heat source. Description of Features vacation mode Conserves energy by disabling interior lights and keypad inputs. mute sounds Tones emitted by each keypress can be turned off based on user preference. The sounds are muted when the red indicator is lit. The mute sounds key also is used to acknowledge alarm conditions, denoted by a flashing red indicator. Press and hold the mute sounds key for three (3) seconds to enable control lock, which prevents undesired changes to the unit settings. Temperature display will show “LOC”. temperature mode Simultaneously press and hold the (+) and (–) keys for three (3) seconds then releasing the key causes the temperature display to toggle from Fahrenheit to Celsius and back again. display light Manually activates the lights, regardless of whether the door is closed. Each successive keypress will advance the interior lights from “Off” to “Low Intensity” to “Maximum Intensity” then to “Off” again. Interior lighting is automatically disabled after 120 minutes, at which point the lights may be manually activated again if desired. on off Press and hold for three (3) seconds then release the key. This allows the user to turn off the cooling system. The temperature display will display “OFF”. THIS DOES NOT REMOVE POWER FROM THE UNIT. Alarms door ajar If the door has been left open for five (5) minutes, an audible alarm will sound and the door ajar indicator will illuminate on the right side of the display. The mute sounds indicator will blink. Pressing the mute sounds key or closing the door will acknowledge the alarm and disable the audible portion and the LED indicator until the door is left open another five (5) minutes. power fail In the event of a power failure or initial power-up, an audible alarm will sound and the power fail indicator on the right side of the display will blink. The mute sounds indicator will blink. Pressing the mute sounds key will acknowledge the alarm and disable the audible portion. All other functions are disabled until the alarm is acknowledged, at which point the power fail indicator is turned off and the unit will resume normal operation. Operation Sabbath Mode Sabbath mode disables portions of the unit and its controls in accordance with the weekly Sabbath and religious holidays observed within the Orthodox Jewish community. Sabbath mode is enabled and disabled by pressing and holding the vacation mode key for five (5) seconds. Temperature display shows “Sb” while in Sabbath mode. The customer may open or close the door at any time without concern of directly turning on or off any lights, digital readouts, solenoids, fans, valves, compressor, icons, tones or alarms. After power failure, the unit will immediately return to Sabbath mode. While in Sabbath mode, alarm indicators will not illuminate, nor be accompanied by audible alarms. For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at http:\\Storage Proper Storage The wine cooler will accommodate 48 bottles (750 ml size). There are five (5) upper racks that will hold eight (8) bottles each and two lower racks that will hold four (4) bottles each. Specially designed wine racks allow for proper horizontal storage of the wine. The cork remains moist which keeps air from entering the bottle. Stocking Recommendations The wine racks allow for the proper horizontal storage of wine. The bottles are properly positioned so that the wine remains in contact with the cork to assure that the cork does not become dry. Use the procedure listed below to stock your wine cooler. White and sparkling wines should be maintained on the bottom to middle racks and red wine on the top racks. Your wine cooler should be stocked beginning with the bottom rack at the back and working forward staggering the bottles. Subsequent racks should be stocked similarly, starting with the back of each rack. Maintenance Maintaining Your Wine Coole...
Este manual também é adequado para os modelos :Dispensadores - 241957000 (757.35 kb)