Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Press MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.) 54 Presetting Stations To tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 53 to automatically or manually tune in to a station. 1 2 • Each time the button is pressed, the band switches between "FM . AM". • “PRGM” flashes in the display. 3 Example: Presetting FM 89.1 in the memory Press to select "89.10". Press the TUNER(BAND) button and select the FM band. • Press the TUNER MEMORY button before ‘PRGM’ disappears from the display. • ‘PRGM’ disappears from the display and the station is stored in memory. 4 5 • You can select between 1 and 15. Press the TUNER MEMORY button. Press the TUNER MEMORY button. 6 To preset another station, repeat steps 2 to 5. Press to select preset number. RADIO OPERATION You can store up to: 15 FM stations 15 AM stations • FM Frequency Modulation • AM Medium Wave TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE RDS RT ST TUNED kHz MHz TITLE RDS RT ST TUNED kHz MHz TITLE CHAP RDS RT ST TUNED kHz MHz 55 Convenient Functions •The remaining time before the DVD player will shut itself off is displayed. •Pressing the button again changes the sleep time from what you have set earlier. To confirm the sleep timer setting, press SLEEP button. • "SLEEP" will be displayed. Each time the button is pressed the preset time changes as follows: 10 . 20 . 30 . 60 . 90 . 120 . 150 . OFF. TITLE CHAP PRGM RDS RT ST TUNED kHz MHz Press SLEEP button. Sleep Timer Function You can set the time that the DVD player will shut itself off. To cancel the sleep timer, press SLEEP button until OFF appears on the display. Adjusting Display Brightness You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER button. • Each time the button is press, the brightness changes as follows: SLIGHTLY DARK . DARK . BRIGHT. Mute Function This is useful when answering a doorbell or telephone call. Press MUTE button. • ‘MUTE’ flash in the display. • To switch the sound back on, press MUTE again or the VOLUME buttons. TITLE CHAP PRGM RDS RT ST TUNED kHz MHz MISCELLANEOUS 56 Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact DVD discs purchased from abroad may not be playable. CD-ROMs and DVD-ROMs cannot be played on this DVD Are you using a deformed disc or a disc with scratches on No sound is heard during fast playback, slow playback, and step from a few speakers and not all six. (Dolby Pro Logic II) on the remote control to use all six speakers. • Make sure that the DVD disc is 5.1-CH compatible. • If you set C, SL, and SR to NONE in the speaker mode in the audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL. Picture does not appear, sound is not produced, or the disc tray opens 2 to 5 seconds later. • Was the DVD player suddenly moved from a cold place to a warm one? When condensation forms inside the player, remove the disc and let the player stand for 1 or 2 hours with the power on. (You can use the player again after condensation disappears.) Dolby Digital 5.1 CH Surround Sound is not produced. • Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. • Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the information display? 57 Symptom Check/Remedy • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking. • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. The remote control does not work. • Is the remote control being operated within its operation range of angle and distance? • Are the batteries exhausted? Audio language and subtitles do not work. • Audio language and subtitles will not work for DVDs not containing them. And depending on the disc, they may work differently. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed. • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. Can't receive radio broadcast. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. • The main unit is not working. (Example: The power goes out or strange noise is heard.) • The DVD player is notworking normally. • Turn off the power and hold the button on the main unit ...
Este manual também é adequado para os modelos :Home theater - HT-DS140 (8.64 mb)