Assessments - 2, GPA: 3 ( )

Fabricante : Milwaukee Arquivo Tamanho: 414.82 kb Arquivo Nome : Língua de Ensino:

3)Drywall Ramp-Off Locator Assembly Fig. 3 Bit holder Insert bit Locator Ramp-off sleeve 1. Unplug tool. To remove the locator assembly, turn the ramp-off sleeve while pulling it away from the tool. 2. Push insert bit into bit holder until snaps into place. Push the bit holder into the nose of the tool until into place. 3. Push the locator assembly of the tool until it snaps 7 Installing and Removing Magnetic Sock- OPERATION ets on Adjustable Screwdrivers For Cat. Nos. 6580-20 & 6581-20 (Fig. 4) 2. To unlock the trigger, pull the trigger and 1. Unplug tool. release. The lock button will pop out. 2. To remove the magnetic socket, slide the locking sleeve forward and pull out the socket. WARNING To reduce the risk of injury, wear safety goggles or glasses withside shields. Unplug the toolbefore changing accessories ormaking adjustments.Using Forward/Reverse Switch (Fig. 6) Fig. 6 Forward 3. To install the magnetic socket, slide the locking sleeve forward and push in the socket until it is fully seated. Trigger Switch Adjusting Locator Assembly (Fig. 8) Reverse The locator assembly controls the tool'sFor Cat. No. 6780-20 (Fig. 5) 1. For forward (clockwise) rotation, push driving depth. These screwdrivers feature 1. Unplug tool. the forward/reverse switch to the left a locator assembly with one-handed depth position as shown. adjustment. Depth adjustments can be made 2. To remove the magnetic socket, slide easily and quickly by turning the locator with the locking sleeve forward and pull out 2. For reverse (counterclockwise) rotation, one hand. Detents inside the sleeve “lock” push the forward/reverse switch to the the socket. the selected depth. right position as shown. For the drywall ramp-off locator assembly, Although an interlock prevents reversing start with about 1/16" clearance between the the tool while the motor is running, allow head of the screw and nose with the snap- it to come to a full stop before revers- action clutch disengaged as shown. ing. For both locator assemblies, the detents on the inside of the sleeve represent different depths. Every two clicks of the locator equal 1/64". Continue adjusting the locator to the desired depth. WARNING To reduce the risk of injury, keep hands and cord away from the bitand all moving parts. Starting, Stopping and ControllingSpeed 1. To start the tool, pull the trigger. 2. To stop the tool, release the trigger. 3. To vary the drilling speed, simply increase or decrease pressure on the trigger. The further the trigger is pulled, the greater the speed. Locking Trigger (Fig. 7) The lock button holds the position for continuous 1. To lock the trigger, hold the lock button in while pulling Release the trigger. Fig. 4 Locking sleeve Socket Lock button Fig. 7 Fig. 5 Locking sleeve Socket 3. To install the magnetic socket, simply push in the socket until it snaps into place. Fig. 8 1/16" Locator Deeper 1. To increase the driving depth, rotate the locator in labeled . 8 9 2. To decrease the driving depth...

Baixe o seu

Para fazer o download, introduza 2 dígitos :