Assessments - 2, GPA: 3.5 ( )

Fabricante : Milwaukee Arquivo Tamanho: 414.82 kb Arquivo Nome : Língua de Ensino:

Continue adjusting the locator to the desired depth. WARNING To reduce the risk of injury, keep hands and cord away from the bitand all moving parts. Starting, Stopping and ControllingSpeed 1. To start the tool, pull the trigger. 2. To stop the tool, release the trigger. 3. To vary the drilling speed, simply increase or decrease pressure on the trigger. The further the trigger is pulled, the greater the speed. Locking Trigger (Fig. 7) The lock button holds the position for continuous 1. To lock the trigger, hold the lock button in while pulling Release the trigger. Fig. 4 Locking sleeve Socket Lock button Fig. 7 Fig. 5 Locking sleeve Socket 3. To install the magnetic socket, simply push in the socket until it snaps into place. Fig. 8 1/16" Locator Deeper 1. To increase the driving depth, rotate the locator in labeled . 8 9 2. To decrease the driving depth, simply For Cat. No. 6780-20 (Fig. 10) APPLICATIONS rotate the locator in the direction The 6780-20 Screwdriver has a torque labeled . setting adjustment collar that may be The detents “lock” the locator in place, adjusted to one of twenty-one settings. ensuring an accurate depth setting. The torque is adjustable from 10 to 140 WARNING To reduce the risk of explosion,electric shock and property dam-mage. always check the work areafor hidden pipes and wires beforedrilling. 1. Select the proper drywall screw for eachinch-pounds. job. Pilot holes are not needed. To insert 3. To remove the locator assembly, turn screws, place the screw onto the insert the ramp-off sleeve while pulling it To select a setting, turn the adjustment bit, then align the screw against the work away from the tool. Reattaching the collar on the tool. The selected setting surface, making sure to hold the tool and locator assembly will not change the will appear above the arrow as shown screw square to the work surface. depth setting. (Fig. 10). If the tool or screw are misaligned, Adjusting Torque Setting the screw will not drive into the work These screwdrivers have a torque setting surface or it will not drive straight. Driving Drywall Screws (Fig. 11) adjustment collar for driving different types 2. Pull the trigger and push the tool forward For Screwdrivers Rated 0-4000 RPM of screws into different materials. When with a “punching” motion to sink the Standard drywall screws are generally properly adjusted, the clutch will slip at a screw into the drywall. A punching mo designed for attaching drywall to wood preset torque to prevent driving the screw tion will engage the snap-action clutch, studs and 26 through 20-gauge steel studs. too deep and to prevent damage to the cause the screw to start rotating, sink MILWAUKEE Screwdrivers are ideal for screw or tool. the screw and disengage the snap-ac driving these types of drywall screws. The tion clutch within a fraction of a second. depth setting is very important. Refer to the If pressure is not maintained on the tool For Cat. Nos. 6580-20 & 6581-20 (Fig. 9) guide below for ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :