Assessments - 3, GPA: 3.3
(
)
)
|
Fotos e especificações Husqvarna DM 340 |
Facilidade de uso
Personal safety •Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”. •Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. •Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting to power source. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. •Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. •Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator’s manual. •Be careful as clothing, long hair, and jewellery can get caught in moving parts. •Remain at a distance from the drill bit when the motor is running. •Make sure that no pipes or electrical cables are routed in the area to be drilled. •Never leave the machine unsupervised with the motor running. •Always unplug the machine during longer work breaks. •Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur. Use and care •Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance. •Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. •Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. •Never use a machine that has been modified in any way from its original specification. •Do not overload the machine. Overloading can damage the machine. •Keep tools sharp and clean in order to enable safer work. •Keep all parts in good working order and ensure that all fixtures are properly tightened. Transport and storage •Do not store or transport the drilling machine with the drill bit fitted in order to protect your drilling machine and drill bits from damage. •Store the drilling machine in a lockable area so that it is out of reach of children and unauthorised persons. •Store the drilling machine and stand in dry and frost free conditions. General working instructions WARNING! This section takes up the basic safety precautions for working with the drilling machine. This information is never a substitute for professional skills and experience. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer, service agent or an experienced drilling machine user. Do not attempt any task that you feel unsure of! •The machine has a very high torque. This demands good concentration during work, as serious personal injuries can occur if the drill bit suddenly jams. •Keep your hands at a safe distance from the drill spindle and drill bit when the machine is running. •Keep an eye open for oil or water leakage. If water or oil trickles out from the leakage hole on the top of the pinion neck, the seals must be replaced. Stand drilling •The machine is intended for stand mounted drilling. •The following Husqvarna drill stands are recommended for use with the drill motor: - DS 50 AT/ATS/Gyro/COMBO/BASIC - DS 70 AT/ATS - DS 450 ATS •Make sure that the stand is secured correctly. •Make sure that the drilling machine is secured correctly in the stand. Drilling outdoors •Always use extension cables that are approved for outdoor use. Drilling in ceilings and the like •Use a water collector to avoid water penetrating into the machine. Machine....s safety equipment This section describes the machine.s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine. WARNING! Never use a machine that has faulty safety equipment! IMPORTANT! All servicing and repair work on the machine requires special training. This is especially true of the machine.s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. Switch The power switch should be used to start and stop the machine. Checking the power switch •Start the machine by switching on the on-off switch. •Switch the on-off switch off to stop the machine. •A defective power switch should be replaced by an authorized service workshop. Befor...
Este manual também é adequado para os modelos :Brocas e shuropopverty - 1152417-30 (540.2 kb)