With the same method, you can adjust the parameter of the LOW VOL and NORMAL VOL O SOUND LOW VOL 00 NORMAL VOL 00 HIGH VOL 00 BALANCE 50 SELECTt * ADJUST *4 ° Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL is C, they should be: 0s£As£Bs£Cs£100 ° You should adjust them in the sequence of HIGH VOL, NORMAL VOL and LOW VOL . 3. Press the S.STD button repeatedly to select the different sound setting modes.

However, you can also use the Direct-digit Choosing button on the remote control to select this channel directly. If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press VOL+/- button to set SKIP OFF.

Do not connect the both at the same time . © I Troubleshooting *To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON CHECKING PICTURE SOUND icture with snow < N / y* \ oise The aerial direction and connection (3J Double or Triple Image K N \ ormal This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect. C£ Disturb \ ‘'Joise El

When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. o 3. Don't place the TV set in the sunshine or near heat source. o 2. In order to prolong the using life of the TV set, please place it on a ventilated place. [7 ys /T\ y- r CD ^ Ï »1 4. To prevent the TV set from firing and electric shock, don't expose the TV set to rain or moisture. ® 5. Don't open the back cover, ot

Press CH+/- button and move the indicator to CHANGE PW. , and press VOL+ button to enter the sub-menu of change password. 4. After inputting the new password, return to the original status as shown on the right form, then, you can input the new password to enter the menu of LOCK setting. LOCK SET UP PASSWORD — CHANGE PW TUNING LOCK OFF PRESET PROG OFF AV LOCK OFF CHILD LOCK OFF MAX. VOLUME OFF UNLOCK -¥ LOCK SET UP PASSWORD — ¡CHANGEPW TUNING LOCK OFF PRESET PROG OFF AV

Press MENU button continuously, until select TUNING menu. TUNING POS EDIT ■* POS EX. ■* SEARCH UP AUTO MEMORY -► SELECT t * ADJUST *4 3. Press CH+/- button and move the indicator to SEARCH. □ <1. TUNING POS EDIT ■+ POS EX. ■+ SEARCH UP AUTO MEMORY -► SELECT t * ADJUST *4 4. Press VOL+/- button to start searching. VOL- button is used to search the lower frquency channel. VOL+ button is used to search the higher frequency channel. Repeat the steps until you find the channel you ne

on..................................................................................................................................3 Ant enn a con nec tio n..............................................................................................................3 Preparation for the remote control .....................................................................................3 Position of keys and plug-ins ............................................................................

TIME OFF APP. POS 0 SELECT* * ADJUST *4 | Setting the other Function 3A filter and screen protection How to use the 3A filter function 1.Press MENU button continuously until select the PICTURE menu. Then press CH+/- button to move the indicator to 3A FILTER, and press VOL+/- button to enter 2.Press CH+/- to move the indicator to the item you want to adjust and then VOL+/- to adjust it . O PICTURE ADJUST 3A FILTER B.B ON SELECT ADJUST *4 3A FILTER 2500K 3300K 5600K 6500K 7300K

Press the Direct-digit Choosing button and input a four-digits password. CHANGE PW. w -Î1 m NEW PW.= — w (5) if' !8j m © I Setting the Lock(continued) Setting the Lock LOCK CV) (8. <0 > I Direct-digit Choosing Button Setting the Lock There are TUNING LOCK, PRESET PROG. ,AV LOCK, CHILD LOCK and MAX.VOLUME five lock setting, you can set it due to your need. 1. Press the LOCK button, the screen will show as the form on the right. LOCK SET UP PASSWORD — C

Choose the proper volume you like_ Press VOL+/- button to adjust the volume. VOLUME 50 If the color of one channel is abnormal It might be because the color has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form. • If the color of the picture is abnormal Press CH+/- button, and move the indicator to COLOR, and press VOL+/- button to select the proper color(AUTO, NTSC3.58,NTSC4.43 and PAL will appear alternately). Generally, pl